Chewing Gum 17 Posted January 3, 2017 Share Posted January 3, 2017 We have Webasto heater from Half moon bay electrical which I think is around 4kw in a 40fter I think the 2 kw would be too small Diesel heater is great and helps keep boat interior dry and good for drying wet gear. We have a vent into the heads and by closing all the other vents it works well as a clothes dryer. Quote Link to post Share on other sites
smithy09 50 Posted January 7, 2017 Share Posted January 7, 2017 BP, we had a 4kW Eberspacher in our 30 ft Dufour when we lived on board in Europe. Although this was massive overkill for 30ft, it would be perfect for 45ft. I cannot rave about them enough. Awesome instant dry heat with no condensation. Eberspacher or Webasto are both good. I'm not sure how the hot water one with radiators works, but knowing these two brands, pretty well I would have thought. What is the story with no live aboards in Gulf Harbour??I used to love all the internationals up there. Gave the place character and also they looked after other boats on their pier with security, looking after mooring lines that broke in high winds etc. That place has gone downhill fast! Quote Link to post Share on other sites
DrWatson 374 Posted February 19, 2017 Share Posted February 19, 2017 BP, You could go all out and replace the cooker with a Wallas Dt85 and Heater/blower lid... Can't remember what the blower unit is worth, but the cook top is about €1280 Of course you could also find an interim solution and install one of these when you visit us here in Europe... Quote Link to post Share on other sites
Black Panther 1,581 Posted February 19, 2017 Author Share Posted February 19, 2017 Where do you put the turkey? Hey Doc we'll be in London July then might get across that bit of water to visit people in germany, where are you based? Did you ever pick up the books Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.