Jump to content

Retractable Prod


Recommended Posts

There's no such thing as reasonably priced carbon tube :mrgreen: but I had great service and heaps of good advice from Tim at C-Tech

I think I paid about $800 inc shipping and gst for a 90 x 6mm wall 1.5m long with clear coat finish and a layer of carbon twill on the outside to make it look purty. They also added some fibreglass in the required areas as insulation againt the alloy fittings that it will have bonded to it.

Hope this helps

Link to post
Share on other sites

Kilwell in Rotorua for sure. It would pay to take a drive and see them business hours. Take some cash, there is a good few seconds out the back they will show you through. Modify your design to suit what you can get. Last I was there I picked up a few bits that together made a 49er mast for nix. Longest section was about 4m from memory.

  • Upvote 1
Link to post
Share on other sites

I got a prod from C-tech a few years back, 2015 actually, $1380 total. Specs:

 

3.8m long

80mm ID

89.1OD ibe

84.1 OD obe - tapered for retracting

4.96kg

Painted white - they recomended for uv protection

Included freight to South Island.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...