Jump to content

Weaver Offshore Hatch - Cut Out 470(H) x 500(W)


Recommended Posts

http://crew.org.nz/forum/index.php/topic/10671-oddball-front-hatch-size/ 

 

Pretty sure this is the previous owner Chris asking the same question? Anyone got any new ideas re weaver hatch ( Now Magnus/Vetus) oddball sizing? Don't really want to have to start cutting the front of the boat a part to replace with a "square hatch". 

 

Have had a look at Cule standard sizing and nothing seems to fit? Neither does there appear to be anything available via Vetus/Magnus in a standard size.

 

Any guidance/thoughts appreciated.

Cheers

 

Ballistic front Hatch.jpg

Link to post
Share on other sites

Have a look in the top left hand corner of the image - frame is broken and bent - has been repaired before - entire seal along hinge edge is detached and hatch frame bent - sheet got under during a gybe when it shouldn't have.

Link to post
Share on other sites

Cule did the same for us. price wasn't a great deal more than a standard one. Was about 9 years ago now (new hatch is still good, shut it before gybing... guess how I learnt that lesson)

Link to post
Share on other sites

Have a look in the top left hand corner of the image - frame is broken and bent - has been repaired before - entire seal along hinge edge is detached and hatch frame bent - sheet got under during a gybe when it shouldn't have.

Ah yes that'll do it!!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...