Myjane

Hi shame about the anchor , but old computer hard drive magnets would be the strongest you could use I dropped a crescent in the marina last week i had an old computer in the shed ratted the magnets , next day up comes the crescent , they are so strong ,two magnets together you won’t getthem apart ,

I clean the bottom off at times and dive with snorkel to the keel , hold breath surface and blow out ,take another breath works ok

I’ve been running two Navman 5500 for some years on inside and one out and find them good , but the screnes are getting small now but navionics on phone seams to be good but small to see some times that’s why I am heading to the iPad , there is some good protected kits for using them out side but hard to see in daylight. ,

Hi I have the mould for the smale,,, kiwi logic ,, Marblehead here at home , I made several in carbon vacuumed bag , They weighed just a few grams ,

Wich plotter you have

Does anybody know where thy took it loved to see it close up

Thanks for that , the only thing that interested me was the fact it has its own nmea in built or that what he saies and cpn is a good nav programme and the version in there was the $300.00 version I find out , weathers turning crap ,,

Thanks kiwi

Archaeological relic , some guy put up a mill to retrieve it and I think I know who it is ,

Looks like an iPad tablet saies running cpn amongst other things maby it’s android

Any one purchased one of the iPad chart plotters on trade me auction 1864965029 from pendragon2 , hope somewone nas need input on what they are like it has cpn and own in built nmea no areal needed or wifi

Its in great condition i wonder if it could be set afloat again

Are you taking temps of the block or heat exchanger , a friend had a sim problem , impeller blade lodged in the bypass tube and blocked some times when pressure built and moved again took him months to find it

Are you taking temps of the block or heat exchanger , a friend had a sim problem , impeller blade lodged in the bypass tube and blocked some times when pressure built and moved again took him months to find it

Muzzled you still running IOR headsails

Alfred pittar I think it was built for,, it featured on a biscuit tin I found many years ago and maby still have , I have seen a guy working on her for a while ,I have seen her owned by4 owners over the years ,

What should the moisture content be for ply or kauri boat , , a mate buying a boat , ply / kauri cruiser racer surveyed today , surveyor said moisture in cabin top 40% and around windows I know a wooden boat holds a certain amount of moisture not counting carvile hulls this is an 80s yacht looks ok , but there must be a certain amount ,

Was way up my boat ramp last night and across the lawn at times

Is myalic a alloy polish

Thankyou will look into this everbright thanks

I saw his boat in cowes a few years ago

Thanks it just looks crappy , I remember the gipsy moth masts were the originals and they just polished them and they looked brilliant , not sure if they were sanded to get an even surface

Today we hauled the mast of my mates boat it’s raw alloy old but very good condition striped every thing off for new stays and rigging Halyards ets we want to clean it off and just polish it , what do we do , sand it , autosol it what , it’s made of good alloy from the old days

It is has a roughish finnish kiwi grip is applied with a textured roller , so it’s the style finnish you create with the roller , this paint has cranuals of rubber in the paint of eaves size , so just roll it on , three coats , if you need remove it just scrape away it’s very easy , some maxi race boats have it on , it leaves a good looking even finnish , and if you have that old style cork /resin finnish , just go over the top and it’s new again, the old finnish I had was only fading in color after 17 years and crc made that one but closed due to health and safety , why I don’t know , it’s

Do it your self , I had a quote of $3200 for a 10 mtr boat , very expensive a quick sand and 5 ltrs of paint didn’t need striping was done a year ago and I was to pay for handstand , no way do it your self