courageous 0 Posted August 21, 2014 Share Posted August 21, 2014 Hi All, If you are the owners of the following GME MT400 /MT401/MT403 these units are identified as being within the recall range. In the first instance contact GME Customer Service recall@gme.net.au for a returned Materials Authorisation Number. Units are then sent to GME/Standard Communications (NZ) Ltd. EPIRB Recall Programme Unit 2.24 Bishop Dunn Place. Botany, Auckland 2013 New Zealand. It appears a number of the above may not transmit when activated. Hopefully my replacement will arrive back by courier next week.. Link to post Share on other sites
Island Time 1,230 Posted August 21, 2014 Share Posted August 21, 2014 Thanks for the post. This is on the front page, covered in detail int his post http://crew.org.nz/forum/viewtopic.php?f=6&t=24611 and in another post further down this page. It is important though! Link to post Share on other sites
courageous 0 Posted August 21, 2014 Author Share Posted August 21, 2014 Sorry about the double post...I had a look through your more recent posts..must have missed it. Cheers Link to post Share on other sites
Farrari 4 Posted August 22, 2014 Share Posted August 22, 2014 Thanks for the reminder. I dropped mine in today to the local NZ Auckland address and have another MT600 coming as a replacement Much better than having to send my old MT403 to Australia as the email first suggested. Apparently the recall is valid until the end of this year. Link to post Share on other sites
courageous 0 Posted September 3, 2014 Author Share Posted September 3, 2014 These folk at GME sure aren't flash at replacing these units, it's now two plus weeks since it was hand delivered, and I was assured that the replacement would be couriered within a week...Anyone else still waiting? Cheers Link to post Share on other sites
Farrari 4 Posted September 3, 2014 Share Posted September 3, 2014 I got the phone call last night to say mine was ready to pick up. Less than the two weeks they estimated so all good for me. I'm just waiting to see what model I am picking up. Link to post Share on other sites
ex TL systems 63 Posted September 3, 2014 Share Posted September 3, 2014 still waiting for mine , got a reciept as mine was a new one for around $260 as it was out of service date, Link to post Share on other sites
eruptn 95 Posted September 4, 2014 Share Posted September 4, 2014 Mine has arrived, about 10 days ago .... they did ring and let me know there were out of stock and there would be a delay at that time. The replacement is a MT600. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.