raz88 97 Posted March 18, 2016 Share Posted March 18, 2016 Have been asked to help move a friends boat out of the marina at West harbour and have in the back of my mind that ive heard there might be draft issues getting in and out of there as the entrance silts up? Does anyone know how deep the main Chanel in and out is? We'll draw about 6 feet, and will probably aim for a highish state of tide, so presumably will have plenty, but it would be good to check with someone who knows. Quote Link to post Share on other sites
marinheiro 359 Posted March 18, 2016 Share Posted March 18, 2016 It was dredged a couple of years back so should be ok. The most shallow spot is where Henderson creek meets the channel, and there is a bump just outside the marina entrance. As long as you are 2 hrs either side of low tide you will be ok Quote Link to post Share on other sites
tuffyluffy 76 Posted March 18, 2016 Share Posted March 18, 2016 You'll be fine. I draw 7'3 and regularly come and go at close to low tide without much trouble. I occasionally have to push my way through a lump of soft slurry but that's at the bottom of a low tide. The marina management has changed recently and there's been a lot of investment made bringing the whole place up to a better standard ie dredging, increasing the height of the breakwater, landscaping, security etc etc. I've been pleasantly surprised at the improvements since the old (bean counter) management sold out to the new crew. The place is on the up. BTW. The name has changed from Westpark to Hobsonville Marina. Quote Link to post Share on other sites
raz88 97 Posted March 20, 2016 Author Share Posted March 20, 2016 Thanks guys Quote Link to post Share on other sites
Tim C 23 Posted March 21, 2016 Share Posted March 21, 2016 40 Years ago this country changed to metric. Your boats were most likely dimensioned at build in metric. Your depth sounder has metres on it. The charts are in metric. Time to change I'd suggest! 1 Quote Link to post Share on other sites
ScarecrowR31 8 Posted March 21, 2016 Share Posted March 21, 2016 Just don't ask TC where he is or how fast his designs go Quote Link to post Share on other sites
Nathan1000 4 Posted September 25 Share Posted September 25 Resurecting a post from the past. I am heading into Hobsonville marina on Monday morning for 8.30am. High tide is 6.40am. Draft is 2.1m. It sounds like that should be fine. Anyone with recent experience that can advise what depths in the channel will be like? Quote Link to post Share on other sites
LE Bb 27 Posted September 29 Share Posted September 29 forgot to reply yesterday. went through at 1550 yesterday and had 3.5mts at shallowest. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.