ab1974 1 Posted March 22, 2010 Share Posted March 22, 2010 I am about to go and put the windows into my Elliot 7.9. Final steps before she goes back into the water after a long long rebuild. Any idea how I can access the previous thread that was on here sometime ago. Remember reading it and it was great, I just didn't print it! Thread was: http://crew.net.nz/forum/viewtopic.php?f=35&t=7959 Link to post Share on other sites
Mothership 6 Posted March 22, 2010 Share Posted March 22, 2010 It was archived off, however, we do have an archive of the complete site, which we've put on a spare domain for now whilst some volunteers parse the forums for valuable information just like this. Take a look here: http://propertyone.co.nz/oldforum/viewt ... =35&t=7959 Link to post Share on other sites
ex Elly 197 Posted March 23, 2010 Share Posted March 23, 2010 Aha the mystery of the missing posts is solved. Well done Holmes old boy Link to post Share on other sites
wheels 543 Posted March 23, 2010 Share Posted March 23, 2010 Mothership, could we have that link pasted here somewhere for future digging around? Link to post Share on other sites
Mothership 6 Posted March 23, 2010 Share Posted March 23, 2010 http://propertyone.co.nz/oldforum If you want to make a note of any useful threads, we will be collating them together at some stage. Also, if you were a member before we upgraded the software, you will still be able to log in. Link to post Share on other sites
Murky 1 Posted March 23, 2010 Share Posted March 23, 2010 Can I also request that the old threads with drink/cocktail recipes - mostly combinations of Mt Gay, limes and sugar - also make it to the list? Link to post Share on other sites
Mothership 6 Posted March 23, 2010 Share Posted March 23, 2010 A sound idea - in fact, maybe a page on the main part of the site for such worthwhile information Link to post Share on other sites
ab1974 1 Posted March 31, 2010 Share Posted March 31, 2010 Another good link to windows which uses the same combination of VHB tape and the Dow Corning sealant including some photos is here. http://www.thecoastalpassage.com/windows.html Also - Anyone know where to buy the VHB tape at a reasonable price or where I can get about 8-10m (comes in a 33m roll at about $175) Link to post Share on other sites
ab1974 1 Posted April 10, 2010 Share Posted April 10, 2010 Any idea whether the is such a thing as the 'inside' and 'outside' side of perspex (ie which side faces inside the boat and which side is exposed to the elements!). The perspex windows I have was precut before I purchased the yacht for the rebuild and it doesn't make any reference on the protective paper stuck to the perspex. Think I read something about the inside / outside on the interweb but now can't find any reference so might just be going mad! Link to post Share on other sites
rigger 47 Posted April 10, 2010 Share Posted April 10, 2010 maybe it depends on the product, with the polycarb windows I had they only had a coating on one side so there was a correct way to fit them - the protective paper was marked showing which side had the coating. Perhaps if there are no markings / instructions it does not matter which way you put them? Link to post Share on other sites
wheels 543 Posted April 10, 2010 Share Posted April 10, 2010 Basically no. It is rare to get a sheet with a coating. Coatings are specialized for a particular use and the protective paper will have a note on it saying which side the coating is on. But for normal sheets which we mostly all use, no there is no actual "right" side. Talking to Seafox the other day, he has had one of his windows leak. He fitted using Sika 295 and the primer. He etched the surface and cleaned with appropriate solvent etc. Followed all the Sika instructions to the T and they still have come away. So I thinbk it is well worth exploring the newer Adhesive/Sealants and that sticky Tape that has been suggested here, rather than the very expensive Sika product that looks like it won't last anyway. The Seafox windows are held by Adhesive/Sealant only, no screws or fastenings. By the way, do you know it takes 2Kg of oil to make 1Kg of Acrylic sheet. Water based Acrylic Paint is basically ground perspex in a suspension emulsion with binders. There are 17 names trade names for the stuff....Policril, Plexiglas, Gavrieli, Vitroflex, Limacryl, R-Cast, Per-Clax, Perspex, Plazcryl, Acrylex, Acrylite, Acrylplast, Altuglas, Polycast, Oroglass, Optix and Lucite Link to post Share on other sites
ab1974 1 Posted April 11, 2010 Share Posted April 11, 2010 Thanks guys. I am going to install using the 3M 4991 VHB tape and the Dow Corning 795 sealant. Windows are recessed so they sit flush with the cabin top sides. The inner surround is 10mm thick all the way around and the recess depth about 6-7mm. Windows are about 4mm thick, so the 2mm thick 4991 tape will see the windows sit flush. The tape is 12mm wide, so I was going to cut it into 6mm strips and fit it along the inner edge of the window frame, so that is what you will see if you look closely between the frame and the window when inside the yacht. That will leave me about 4mm on between the tape and the outer edge of the window frame to put the 795 sealant. Lots of tape on the outside of the cabin and the window. Will also paint the inside of the window so you can't see the tape and sealant when installed. Hope it works! Link to post Share on other sites
Guest Posted April 11, 2010 Share Posted April 11, 2010 Will also paint the inside of the window Link to post Share on other sites
ab1974 1 Posted April 11, 2010 Share Posted April 11, 2010 Paint the outer 10mm of the window - good pick up squid Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.