Jon 407 Posted August 22, 2016 Share Posted August 22, 2016 I'm lifting Ma'ara in a few weeks to do the antifoul and wanting to replace the stripe above the waterline, it was damaged by the anchor chain up in the Med before we bought her. Also want to redo the name etc plus we need sail numbers on the hull. Who can you recommend team ? Boat will be at Pier 21. Also thinking of putting name on both sides of the boom as its a leisure Furl boom and then only having the name on the stern, does this comply with YNZ requirements ? Quote Link to post Share on other sites
Herdy 0 Posted August 23, 2016 Share Posted August 23, 2016 Give Dan a call at Boat Coat. 021 297 6878 You have already seen his work. Tell I recommend him. Quote Link to post Share on other sites
Island Time 1,288 Posted August 23, 2016 Share Posted August 23, 2016 Nope, YNZ requires name and numbers on the Hull. Quote Link to post Share on other sites
tuffyluffy 76 Posted August 23, 2016 Share Posted August 23, 2016 Stanley Signs in Rosebank Road did my stripes and name about 6 years ago and its still looking great. Quote Link to post Share on other sites
Jon 407 Posted August 23, 2016 Author Share Posted August 23, 2016 Nope, YNZ requires name and numbers on the Hull. All I can find in the safety regs is must be at least 50mm in height preferably 100mm, Thinking name on stern and sail numbers on each side of bow plus name on boom. Have Signcorp coming to look at boat tomorrow will try Stanley Signs if need a second option Dan from Boat Coat is overseas at present, thanks Herdy Quote Link to post Share on other sites
ScottiE 174 Posted August 23, 2016 Share Posted August 23, 2016 Auckland Council - through AT - through Harbourmasters office also have a bylaw covering this. You would only come under YNZ if you a) race or go offshore. Hopefully their consistent! Quote Link to post Share on other sites
Jon 407 Posted August 23, 2016 Author Share Posted August 23, 2016 Auckland Council - through AT - through Harbourmasters office also have a bylaw covering this. You would only come under YNZ if you a) race or go offshore. Hopefully their consistent! Doing the cruising Div in the Coastal with family and going offshore agains as soon as I sort work out Will sus the harbourmaster etc, funny how you can sail 15000nm over halfway around the world and now you want to do something in your own country you now have to jump through hoops. Quote Link to post Share on other sites
Jon 407 Posted August 23, 2016 Author Share Posted August 23, 2016 Harbour regs Vessels to be identified (1) A person must not use a vessel on navigable waters unless it displays a name, consisting of letters the Roman alphabet or numbers that are not the vessel’s brand, make or model, and that is distinct to that vessel. (2) Subject to clause (3), this clause does not apply to: (a) non-mechanically powered vessels of less than six metres in length; and ( power driven vessels of less than four metres in length. (3) Non-mechanically powered vessels and power driven vessels referred to in subclause (2) must be marked with the current owner’s name and contact details somewhere on the vessel. (4) The name, identification mark or number referred to in subclauses (1) must be displayed above the waterline on each side of the vessel by the person in charge of the vessel. The minimum height of the name, identifying mark or identification number is 90 millimetres and it must be legible by day from a distance of at least 50 metres.The Quote Link to post Share on other sites
smithy09 50 Posted August 23, 2016 Share Posted August 23, 2016 Jon, Signcorp were awesome with the Marshall. Recommend!! Quote Link to post Share on other sites
AJ Oliver 155 Posted August 24, 2016 Share Posted August 24, 2016 . . must be at least 50mm in height preferably 100mm, ." Are these big enough? Quote Link to post Share on other sites
ScottiE 174 Posted November 15, 2016 Share Posted November 15, 2016 Jon - did you get anywhere with this - my previous arrangement just fell through so I'm on the prowl for name and stripes also. Quote Link to post Share on other sites
smithy09 50 Posted November 15, 2016 Share Posted November 15, 2016 Jon - did you get anywhere with this - my previous arrangement just fell through so I'm on the prowl for name and stripes also. ScottiE Signcorp in Westhaven were brilliant. I'll plug them again! Quote Link to post Share on other sites
ScottiE 174 Posted November 16, 2016 Share Posted November 16, 2016 cheers smithy I might just follow that up and see what they can do for me. There's no doubt the Marshell looks fantastic! Quote Link to post Share on other sites
smithy09 50 Posted November 16, 2016 Share Posted November 16, 2016 They were great to deal with and did an excellent job. Nathan Westby is the man to talk to. http://www.signcorp.co.nz/ Quote Link to post Share on other sites
Jon 407 Posted November 16, 2016 Author Share Posted November 16, 2016 Sign corp did a great job for us also Not cheap but couldn't fault the work Quote Link to post Share on other sites
Black Panther 1,745 Posted November 16, 2016 Share Posted November 16, 2016 I think I know that girl Quote Link to post Share on other sites
Battgirl 23 Posted November 16, 2016 Share Posted November 16, 2016 Hahaha. Those boats look great. If someone wants to do budget DIY its possible to get a lot for $120. I did my own art went to North Harbour signs who took a photo, printed sets plus extra numbers and labels of different sizes which I applied myself after watching a youtube vid. If someone can explain in basic language how to put a photo on here I can show the evidence. Quote Link to post Share on other sites
ScottiE 174 Posted November 16, 2016 Share Posted November 16, 2016 click "More Reply Options" next to the post button then click "Browse" to navigate to the file you want then click "Attach this file" then click "Post" or "Add Reply" Quote Link to post Share on other sites
Dambo 44 Posted November 17, 2016 Share Posted November 17, 2016 This curly lettering was printed by one of the people on Trademe and then I applied it - pretty stressful - 3 sets of hands on the big 'S' but the end result was great. But if I was going for a big graphic such as on Marshall Law, I'm thinking that I'd pay someone else to do it... Quote Link to post Share on other sites
Black Panther 1,745 Posted November 17, 2016 Share Posted November 17, 2016 How many letters are you allowed with out a vowel? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.