Jump to content

Alado furler


Recommended Posts

The halyard runs around the block at the top, and is fastened at the drum. It runs externally down beside the foil. Excess can be removed or coiled at the base. The big advantage of these foils for a cruiser is the fact that the foil is split, and can be removed from the foredeck, without going aloft, and without removing or detaching the stay. Easy to self service, and basic design.

Sure, come have a look, just give me a call to make sure I'm here. 0221539176,

Matt

  • Upvote 1
Link to post
Share on other sites

With the Alado furler my existing jib is Hank to wire fix ,, the foot is down on deck say 6 inches above will I need the foot trimmed to compansate the drum , I see guys are using kiwi slide replace Hank's then will one if leaving on full time need the cover strip a fixed to the gib , or some just take it off and bag it thanks

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...