crocodile 0 Posted September 24, 2016 Share Posted September 24, 2016 Hi wise people My 2-speed winches started jamming a bit and it seems the issue is the lower pawl slots (or whatever they are called) are worn and the pawls wobble about. Either they sort of pop out and semi jam or the pawl springs work their way out and either lock up the pawls or get bent. In the photo this is the inner brass casting (machined?), I have shown how the one pawl does not lock snuggly into the slot. Barient was bought by Lewmar a million years ago and I cannot find any info about getting replacements for Barient. Does anyone have any advice please? John Quote Link to post Share on other sites
ScottiE 174 Posted September 24, 2016 Share Posted September 24, 2016 http://www.huttonwinches.com/products/spares Shame you didn't post a few weeks ago - Vorpal Blade just place an order with them. Quote Link to post Share on other sites
crocodile 0 Posted September 24, 2016 Author Share Posted September 24, 2016 Thanks, I have emailed them so will see how that pans out. On a related issue - can one get aluminium drums re-knurled? Quote Link to post Share on other sites
ScottiE 174 Posted September 29, 2016 Share Posted September 29, 2016 Did you get a reply? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.