rmiker 15 Posted July 2, 2018 Share Posted July 2, 2018 I did ours with kiwigrip 3yrs ago and was still looking pretty good last weekend: I know because I looked hard thinking this must be due for replacement. But it won't be this season Quote Link to post Share on other sites
Tim C 23 Posted July 4, 2018 Share Posted July 4, 2018 I used Don't Slip again on Pulse, but this time added the non slip spheres you'd use in two pot paint. The curved main beam surface is now really grippy, and I'm pleased with that. On the flat cockpit floor I've had problems with it bubbling off because it tends to stay wet. This time I used an acrylic under coat before the Don't Slip, and that too has worked well. I'll try and dig out the name of the undercoat I used... Quote Link to post Share on other sites
Crazyhorse 47 Posted July 4, 2018 Author Share Posted July 4, 2018 Thanks Tim. No hurry, no one can paint in this! Can't even sand!!!..rain, sun, rain, sun... Found it, smart marine have it $119 for 4lts. Its basically the same as kiwigrip? Uses a roller to bubble the surface as its super thick so 4lts doesn't go far. I think if we paint the deck with an acrylic then mask off a walkway but was looking to do the hole deck with the one paint. My dad used a paint called 'rhinocoat', no longer made unfortunately as he got years out of it and would have slapped that on. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.