Jump to content

Carbon Fibre Sheet


Recommended Posts

I’ve brought it for that purpose off Hurricane Rigging in Wellington before, they have a water jet cutter and cut it to shape for you. I think MG composites, also in welly lay it up.

It’s actually fibreglass with a carbon twill on top - same difference for backing plates.

Link to post
Share on other sites

OK, id like to buy some carbon sheet, say 2mm, to use as backing plates for replacing instruments, when the cutouts are wrong, to big etc. 

anyone know where I can buy some?

Thx

Matt

 

Arts and craft supply shops sell it for about $20 per A4 sheet, or you can buy it online.

 

Googles your friend

 

https://www.etsy.com/nz/listing/570166347/carbon-fiber-sheet-for-prototypes-rc?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=carbon%20fibre%20sheet&ref=sc_gallery-1-10&plkey=0b0f4ce53642a9a521fb69467cd204829764aacf:570166347

Link to post
Share on other sites

That would be great KM. maybe a couple of bits, say 500 x 400 should last me a while! Let me know how much. Glass with carbon front would be fine.

Matt, I brought some from eBay, I have a sheet I no longer need (2mm) happy to pass it on. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...