Mario 0 Posted May 10, 2021 Share Posted May 10, 2021 I have a tracker 7.7 (~25 ft) and it will be my first time hauling a boat out. I want to leave it out of the water for a couple of days to do the AF and a few bits around the hull (specially build a new rudder). Quote Link to post Share on other sites
aardvarkash10 1,070 Posted May 10, 2021 Share Posted May 10, 2021 Panmure Yacht Club. https://pybc.org.nz/facilities/boat-maintenance/ Dawn is the Office Manager, Steve Hill is the Yard Manager. @Winter, you still on the hard there? Quote Link to post Share on other sites
Mario 0 Posted May 10, 2021 Author Share Posted May 10, 2021 Have anyone had a good experience with the lsb (Little Shoal Bay) boatyard? I'm assuming they will have a very cheap option Quote Link to post Share on other sites
Winter 42 Posted May 10, 2021 Share Posted May 10, 2021 2 hours ago, aardvarkash10 said: @Winter, you still on the hard there? Yeap, slow going, but progress is progress! It's a great yard. Quote Link to post Share on other sites
Jon H 1 Posted May 10, 2021 Share Posted May 10, 2021 The Landing at Okahu Bay has quite reasonable rates. I’m looking into that for my imminent haul out in the coming weeks. I haven’t used them yet but chatting to some of the boaties working around the yard I’ve heard good feedback http://www.thelanding.org.nz Quote Link to post Share on other sites
dutyfree 170 Posted May 11, 2021 Share Posted May 11, 2021 14 hours ago, Jonh said: The Landing at Okahu Bay has quite reasonable rates. I’m looking into that for my imminent haul out in the coming weeks. I haven’t used them yet but chatting to some of the boaties working around the yard I’ve heard good feedback http://www.thelanding.org.nz I used them last year. Friendliest yard I have been in. The lift out guy actually smiles, talks to you and is a boatie! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.