Jump to content

B&g plotter w garmin wind sensor

Recommended Posts

The wired wind sensors and kits normally come with the GND10 IT, as the nexus output of the sensor does not plug into the displays, which are nmea2000. 

If you mean the wired one, and you have a GND10, you just network everything with NMEA2000 and wind will show up on the Vulcan. BUT, you can’t calibrate the wind sensor without a Garmin display of some sort at least temporarily connected, if not permanently in the system. I have a Vulcan plugged to a Gwind instrument kit on one of my boats, with the Garmin display still used, I will change it all out to BnG, the Triton2’s are a much nicer racing instrument display.

If you mean gwind wireless, they talk directly to a Garmin instrument or certain plotters, and you will need one in your system.


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...