203 0 Posted May 20, 2012 Share Posted May 20, 2012 Looks awesome! well done! Sucks about the rudder, Although thats the big part of owning a fast boat She looks great! Link to post Share on other sites
Megwyn 2 Posted May 20, 2012 Share Posted May 20, 2012 Mmmmm - very noice Link to post Share on other sites
Marshy 30 Posted May 20, 2012 Share Posted May 20, 2012 Looks great Dean! Well done. Quick build too which is motivating! That rudder pin looks well loaded up too? Not straight anymore? Link to post Share on other sites
Hurts 6 Posted May 20, 2012 Author Share Posted May 20, 2012 That rudder pin looks well loaded up too? Not straight anymore? Yep rudder pin totally munted - I'm glad it bent cos otherwise it would have damaged the float/top of the case too. When I bought the stainless tube they made me buy 4 meters of it so I have plenty spare to make another. Re build time - It certainly seemed like it took a while to build to me. Are you building something also? Link to post Share on other sites
samin 0 Posted May 21, 2012 Share Posted May 21, 2012 Looks awesome Dean, congrats I have to say im a little concerned I might not have the fastest 8.5 Tri out there for the next winter series race! Did you build the rudder cases to Farriers specs? Iv got 16 layers of carbon and a half inch pin on my rudder gudgeons... been there, broke that...( 5 or so time on the GDT) Link to post Share on other sites
TimW 1 Posted May 21, 2012 Share Posted May 21, 2012 Dean well done it just looks so cool. I love the name, Hurts like Heaven is just so appropriate. Good Luck on your first race. Link to post Share on other sites
johnMi 2 Posted May 21, 2012 Share Posted May 21, 2012 Looks even better in real life.. Link to post Share on other sites
Hurts 6 Posted May 21, 2012 Author Share Posted May 21, 2012 Looks awesome Dean, congrats I have to say im a little concerned I might not have the fastest 8.5 Tri out there for the next winter series race! Did you build the rudder cases to Farriers specs? Iv got 16 layers of carbon and a half inch pin on my rudder gudgeons... been there, broke that...( 5 or so time on the GDT) I wouldn't be too worried about us for a while Sam - I've got huge holes in my sail inventory and then there is the "human factor" - you've been sailing these for a long time... Target no 1 for us (apart from actually finishing) will be a certain other folding tri sitting across the car park ... . I hadn't followed the Farrier specs but now I've bought it up to the same level of strength (approx 2250 gm of uni and 800 of 45 deg in total) but the design is a bit different - It will be about 4 times stronger now and I was pretty confident until you mentioned the 16 layers - 16 layers of what exactly? Link to post Share on other sites
samin 0 Posted May 21, 2012 Share Posted May 21, 2012 I used a mix of 400gm db and 300gm uni, roughly 2/3 uni vs 1/3 db (by weight) so total of approx 5000 grams its about 8mm thick including the orkot bearing. also mine are almost 600mm apart so have half the torque on them compared to yours... I have to say it was nice to push it hard it the BMW regatta and not have the rudder fall off for a change! Link to post Share on other sites
Hurts 6 Posted May 21, 2012 Author Share Posted May 21, 2012 OK thanks - I might do another round of DB and Uni's then I don't want this particular problem to rear it's ugly head again. It is nice having two rudders and an outboard that I can steer with also - heaps of redundancy. I took my dad's boat out once in my teens (Compass 790 w diesel inboard) and had the rudder break off the back - was basically screwed at that point and had to get a tow back. Are you back in the country and racing Saturday? I had the impression you were away longer? Link to post Share on other sites
johnMi 2 Posted May 21, 2012 Share Posted May 21, 2012 arget no 1 for us (apart from actually finishing) will be a certain other folding tri sitting across the car park ... . That's a bit unfair Dean, Pressure Link to post Share on other sites
Guest Posted May 24, 2012 Share Posted May 24, 2012 Thanks for the invite to sail on the mongrel today Dean as I had a great time lying around your new boat taking a few photos. Link to post Share on other sites
Atom Ant 0 Posted May 24, 2012 Share Posted May 24, 2012 Niiiiiiiiiicw... Tripod envy is rearing its ugly head here while I type this. Very nice looking mast you got there, where is it from? Link to post Share on other sites
Clive 13 Posted May 24, 2012 Share Posted May 24, 2012 Nice one! You going to ease into the 8.5 Division on Saturday? Link to post Share on other sites
Hurts 6 Posted May 24, 2012 Author Share Posted May 24, 2012 Cool Stephen, glad you enjoyed the ride, ta for the pics. Was a great afternoon for it - boat was certainly moving but not too terrifying and didn't manage to break anything of significance this time. Mast was made by living (multihull) legend JT of JT spars. I believe it is basically the same as Lucifers. Yes Clive, if I can get crew sorted I'll be putting some "L" plates on the back of the boat and joining the fleet for a race on Saturday. Be gentle on the newbie. Speaking of which I've been looking at the SI's what is a black/white numbers flag? I'm guessing the numbers are "8.5". Do I need to tool along to the squadron tomorrow to buy one? Link to post Share on other sites
Clive 13 Posted May 24, 2012 Share Posted May 24, 2012 Yes Clive, if I can get crew sorted I'll be putting some "L" plates on the back of the boat and joining the fleet for a race on Saturday. Be gentle on the newbie. Speaking of which I've been looking at the SI's what is a black/white numbers flag? I'm guessing the numbers are "8.5". Do I need to tool along to the squadron tomorrow to buy one? Good news, weather should be good for a drift and nothing too stressful. The SI's refer to the 8.5 Logo on the sail. We don't need flags now. I think we have run out of them though, Tim off Whio may have a set though. Will ask him... Link to post Share on other sites
Hurts 6 Posted May 24, 2012 Author Share Posted May 24, 2012 OK good to know - are we talking about a sticker that I can slap on my main or ??? Link to post Share on other sites
Clive 13 Posted May 24, 2012 Share Posted May 24, 2012 Yes that's right, TP52 type sticker. Link to post Share on other sites
Guest Posted May 24, 2012 Share Posted May 24, 2012 Boat looks awesome mate, have fun tomorrow, breeze looking really light so ideal way to kick off. Technically the sail numbers shouldn’t be supplied until the boat has a measures cert. Link to post Share on other sites
Rental 1 Posted May 25, 2012 Share Posted May 25, 2012 OK good to know - are we talking about a sticker that I can slap on my main or ??? Don't worry about the sticker most of the time the Squaddy notices that you are doing 18kts past the finish line with a stupid grin on your face and no keel boats and insight and figure it must be one of those new fangled multihull things................. See you out there and have fun but keep out of the way of the Stewart 34's !! Make sure you pop over to WXY after racing because it is far more fun talking about you when you are there !! Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.