Guest Posted March 12, 2012 Share Posted March 12, 2012 so the javelin has finally been condemned to the bin after 30 odd years and ive been left with a pile of gear. as you can sea from the pictures theres quite a few harken and ronstan blocks and cleats in various sizes. there is a couple of blocks in average condition and also a coupe of brand new ones but everything is on good working order. stainless steel rudder gantry with gudgeons- 1.27m wide and 290mm high, pretty good condition. alloy boom is in ok cond. and is 2.34m long and 75mm dia with all the vang, outhaul and mainsheet fittings. the ronstan mainsheet blocks are brand new and have only been used once. carbon fibre prod- 1.83m, tapers from 45mm O.D to 30mm O.D. the tack block is micro harken ball bearing. the SS stays are in good condition, bobstay is 1.8m, sidestays are 3.8m. prod and mast are both 2004 but i think the boom is quite a bit older. alloy mast is in good condition with a near new 20m 5mm spectra kite halyard which has only been used less than a dozen times. trapeze wires, stays and quick adjusters are good, near new metal trapeze cleats used less than a dozen times. 1 ok condition dacron main with a ripped batten pocket, 1 ok condition dacron headsail and an ok cond. red gennaker. it was a bit too wet and windy today to get the rig and sails out for measuring and pictures so i will try to do it tomorrow. im willing to sell everything separately so please make an offer on whatever you would like. jordan Link to post Share on other sites
grant 40 Posted March 12, 2012 Share Posted March 12, 2012 hi Jordan, are the stay adjusters permanent on the stays or separate? can you get a photo of the adjusters? also.. in the top photo, 2nd row, the 2nd & 3rd blocks in (double bearing blocks one with becket) what size line are they for please? cheers Link to post Share on other sites
B00B00 306 Posted March 12, 2012 Share Posted March 12, 2012 I could be interested in some of the clam cleats. Link to post Share on other sites
Guest Posted March 13, 2012 Share Posted March 13, 2012 grant, the ronstan double blocks can take up to a 6mm line. heres some pics of the rig and sails, the main is port nicholson, hood jib and fyfe kite. Link to post Share on other sites
Vivaldi 53 Posted March 13, 2012 Share Posted March 13, 2012 Hi Jordan - can you tell me what the luff measurement on the gennaker is? Link to post Share on other sites
Guest Posted March 13, 2012 Share Posted March 13, 2012 the luff is 7m and the foot is 4.5m Link to post Share on other sites
Vivaldi 53 Posted March 13, 2012 Share Posted March 13, 2012 Got anything in your shed with a 10 -10.5 luff? Link to post Share on other sites
Guest Posted March 13, 2012 Share Posted March 13, 2012 gennaker now sold. i could be interested in selling this kite once i get my other one repaired, i will get it out for some pictures and measurements tomorrow if you would like Link to post Share on other sites
crossa 0 Posted March 15, 2012 Share Posted March 15, 2012 how much for all the deck gear, will take the lot if reasonable cheers crossa Link to post Share on other sites
Vivaldi 53 Posted March 16, 2012 Share Posted March 16, 2012 Thanks Jordan, that would be good. Link to post Share on other sites
grant 40 Posted March 21, 2012 Share Posted March 21, 2012 so does no reply to the PM mean a no then? Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.