Leaderboard

Did VHB tape around the window opening and a ton of masking tape (maybe 50-60mm wide) around the outline of the outer window. Hot glued a couple of small blocks of wood on top of the masking tape along the bottom of the window so I had something to rest it on and get it lined up (was doing it singlehanded). Spread the MS35 liberally on the cabin side between the VHB tape and the masking tape making sure all the cabin side was well covered. Then just carefully pushed the window on and pressed it down from centre out to the edges to make sure VHB had grabbed and some squeeze out

Yeah, bloody national voters. Just a vocal minority. 😁