Y88 5241

Motor driven on Wired

Think it’s just the tracker updating, happens with quicker boats. Equlibium has similar for some of their tacks to

What boat is this?

NOTICE TO COMPETITORS # 1 Posted Wednesday 15 February 2023 at 1240 hours Please note that the BALOKOVIC CUP scheduled for Friday 17 February has been postponed due to the impacts of Cyclone Gabrielle. A revised race date will be announced in due course.

was one on trademe last week

We have the brass monkey one, very handy thats for sure.

The alloy pole is an actually retractable bowsprit. There should be a round fitting on the front and a pad eye approx 1/3 the length back on the foredeck. Looks like it has a bobstay with a purchase system to tighten See https://www.seldenmast.com/products/gennaker-bowsprits/

There are heaps free at the moment at PH. Give the office a cLl

Looks like someone was onboard? Doesn’t usually hVe the kayak on the back

I replaced my throttle controller to a spin lock one in February. The mechanism I used is this one https://www.marine-deals.co.nz/catalogsearch/result/?q=SeaStar+B700Ss+Side+Mount+Control then you use the spin lock exterior - https://fostersshipchandlery.co.nz/products/spinlock-atcu-winch-handle-throttle-control All works really well and a lot smoother than the old system! Nice upgrade. PM me if you have any questions. We did need a bit of reglassing to make the new one fit, as the old hole was quite a bit bigger.

Anyone know of any divers who service Pine Harbour marina?

Sold and Gone Jon; New owners aren't interested in the hardstand side of the business and shutting it down

Yes correct, Pier 21 hardstand is gone from Friday 21st July

Yes Boat Right has closed down, Gloss Boats has moved most its operation out to Tamaki Marine Park.

Approx 2.5x the normal AF costs

Application is by approved applicators (I work for Gloss Boats). Its a three day process to correct application but gives a very smooth and slippery surface. Longevity? Still to be seen however the manufacturer gives a very good warranty period.

We just anti fouled a boat with the Hempel Silicone Antifoul, very slippery stuff

What size line do you need

We use Awlgrip products all the time and well stocked in NZ through Akzo Nobel, who also do International Paints

Found the issue! Zeus had selected to use COG as heading, boat not moving = no heading = no TWD!

Trying to get my Zeus/Triton displays to show TWD again. TWS and TWA working all ok, Percision 9 compass is working/configured. Any ideas here?

You can use Propspeed on the leg as well as the propellor

Volvo 65 has been packed up, with the boat for sale

Altex are still making #5 on a daily basis, in fact there is a wait time for the product at the moment.

Wonder who actually owns it now? If the school took the boat, perhaps the clean up cost is now on them?