Guest Posted April 30, 2014 Share Posted April 30, 2014 Hi, Does anyone know who deals with stowe marine electronics in NZ, need to get a new speedo sensor thought I would check here before contacting the UK. It is for the dataline series. Cheers, SS Link to post Share on other sites
AlanB 2 Posted May 1, 2014 Share Posted May 1, 2014 What exactly do you need? I have an old Stowe log in the shed. Link to post Share on other sites
Guest Posted May 1, 2014 Share Posted May 1, 2014 The speedo sensor with the paddle wheel, wheel spins freely and still has the magnets but no readout have tested with multi meter and its buggered. Cheers, SS Link to post Share on other sites
AlanB 2 Posted May 1, 2014 Share Posted May 1, 2014 What I have is the blue plastic speed transducer with paddle wheel at one end and screw cap/T bar to lock on skin fitting at the other. Diameter (ID of skin fitting) about 33mm, height of unit about 80mm. Output cable ends in 3 bare wires. Was working when I took it off boat about 10 years ago because display failed. Replaced it with Navman but that's another story (sigh). The display was the Micro, don't know if the transducer is interchangeable with the Dataline. Alan Link to post Share on other sites
Guest Posted May 1, 2014 Share Posted May 1, 2014 yip thats the one. I have the blue one also. From what I understand they are interchangeable. Cheers, 2dr Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.