Lydia 0 Posted June 15, 2016 Author Share Posted June 15, 2016 I'm not sure where the horse came from, but thanks for the help. I'll keep trying Fng until I can get through. Quote Link to post Share on other sites
Guest fng Posted June 16, 2016 Share Posted June 16, 2016 Hi lydia it's a difficult or near on impossible thing to price Straight planking is easy enough, but it's all the corners margins and king planks that eat labour. If you look at farina's suggestion of 40 -50k for a 42ftr and considered the the 30ftr may have the same amount of corners and hatches etc to go around the labour content could be very similar, so the only saving would be in the metres needed. The team I do teak decking with are paying about 18k a cube for planking and about 22k a cube for the bigger stuff for the fiddly bits and king planks etc. In a high wear areas you could expect to lose up to 1mm of thickness per year if scrubbing as well. So lots of things to consider. A simple 9mm by 47 - 50mm would cost somewhere in the 20-22 per lm The last full deck we did the straight planking was 29 a lm. So as you see there is near on a 30% difference just in plank sizing. So just too difficult to even ball park Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.