Ptown 14 Posted November 30, 2020 Share Posted November 30, 2020 Hi team Just pulled an old air cooled wall/thru mounted unit off the icebox and would like input into best solution as these do not seem to be made any more. Options seem to be replace with isotherm unit which seems a bit more complexor chainsaw out old icebox and use a portable 12v unit. PS it's a racer that is cruised Thoughts? Quote Link to post Share on other sites
2flit 52 Posted November 30, 2020 Share Posted November 30, 2020 I like this company allot. Have used their unit for three years now. https://www.ozefridge.com/packages Quote Link to post Share on other sites
marinheiro 352 Posted November 30, 2020 Share Posted November 30, 2020 2 hours ago, 2flit said: I like this company allot. Have used their unit for three years now. https://www.ozefridge.com/packages IT is their NZ agent Quote Link to post Share on other sites
CarpeDiem 430 Posted November 30, 2020 Share Posted November 30, 2020 5 hours ago, Ptown said: PS it's a racer that is cruised. Perhaps portable 12volt unit. Engle do a great unit with lockdown feet that can be secured in place easily and quickly. They also do insulated bags to save battery on those longer races. Our engine driven fridge has also died - the cost to replace it is astronomical cause of the woodwork - but if I ever did replace it properly - I would be with an Ozefridge and custom cabinet. So I am also seriously considering the less expensive Chainsaw/Portable approach. Quote Link to post Share on other sites
Young Entertainer 59 Posted November 30, 2020 Share Posted November 30, 2020 I did this on Rawhide, went with the isotherm diy package originally, then cut the top of the box and had the copper braised to the back and reinsulated. Cut the power requirement in half and made it an awesome freezer. Total cost was in the 5k Mark Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.