Absolution 7 Posted March 4, 2014 Share Posted March 4, 2014 I'm looking at putting some of the reaching sails on Fineline onto furlers to make them easier to handle shorthanded. There seem to be lots of options in the market these days so its hard to figure out what to buy. Just wondering if anyone here has anything good (or bad) to say about any of the code zero or top-down furlers that you have used? Link to post Share on other sites
nz moth 0 Posted March 4, 2014 Share Posted March 4, 2014 Have a look at Beau Marine!!! Link to post Share on other sites
Absolution 7 Posted March 4, 2014 Author Share Posted March 4, 2014 Have a look at Beau Marine!!! I have had a look online but don't know anyone that has used one. Didn't you get a sponsored furler from Selden? Link to post Share on other sites
SloopJohnB 323 Posted March 4, 2014 Share Posted March 4, 2014 Try KZ Marine / Furlers http://www.kzracefurlers.co.nz/ Link to post Share on other sites
Marshy 30 Posted March 4, 2014 Share Posted March 4, 2014 We had a Beau Marine furler on Mercenary (Albeit a bit smaller!) likewise Rattle had one, wicked pieces of kit! Worked awesome, took a thrashing and never had a problem with it! The KZ marine gear in the bigger sizes is bloody good too. Its a bit more expensive but thats technology for ya. And i think 90% of the Volvo fleet used them, likewise all the AC72's did too... Link to post Share on other sites
nz moth 0 Posted March 5, 2014 Share Posted March 5, 2014 Very true but Beau help me out a lot too. I don't have a kite furler but my code zero furler by Selden is amazing also the 204s on my forstay. Link to post Share on other sites
smithy09 50 Posted March 5, 2014 Share Posted March 5, 2014 We have a Karver on the Marshall for our code zero. It has a locking mechanism that is quite handy. Stops inadvertent unfurls. Never let us down. Once you go to furling sails, I reckon there's no going back. Awesome. Heard only good things about the KZ ones as well... Link to post Share on other sites
Absolution 7 Posted March 5, 2014 Author Share Posted March 5, 2014 All good info thanks folks! Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.