yanmar 2qm20 exhaust mixer elbow
So, happily motoring away from Panmure YBC haulout yesterday and there is a sudden change of tone. Donkatadonkatadonkata gets the addition of a chuffatachuffata.
I'm all for hamonies, synchopation and the such, but a quick look under the hood revealed a 5 - 10mm rust hole blown through the Yamnar's exhaust mixer.
Half a roll of baking tinfoil wound arond the pipe and held by some 3mm cord and the weekend was recovered, but its not going to last forever. Has anyone got an old 2qm20 ha
I ended up having it made. Ryan runs a workshop from home (just out of Waiuku on the Awhitu Penninsula) part time specialising in stainless exhaust fabrication and has a strong sideline in resoring and building 4WD projects from what I could see.
Super-friendly, quick, and reasonable but not cheap - $220 all up.
Exhaust is in 316 and is an exact copy of the fabricated item it replaces. Ryan machined the grip rings on the barb for the water inlet - nice attention to detail.
He is
