Jump to content

FS: Sandy Jones "Ruffian"


Quismiff

Recommended Posts

28'6 Sandy Jones Design/Built Half Tonner. Purchased as a project 5 years ago for $10,000. I have put $5,000+ worth of electronics, sails, sign writing, squab/sail covers into it. 2 years ago the prop shaft broke at coupling and the Mrs got pregnant. Unfortunately my project went to the bottom of the priority pile. Tried to start her the other day and she wont start. I just don't have the time or money to get her up and running again. I have had a quote of around $600 to fix the prop shaft. Not sure what is wrong with the engine but was working ok 3 months ago so could be an easy fix. Don't want to let her sit unused any more. Would Like to get $3000 to replace some of the money I spent on the electronics but will consider all realistic offers. See below for details...

 

1x Main Sail, Fair condition

1x 140% Genoa

1x #3 Jib

1x #4 Jib

1x Navman GPS/Chartplotter, CMap Chip for Auckland to Bay of Islands

1x Multi Display with Speed and Temp/Depth Senders

1x 12 Switch Switch Board

1x Battery Switch Panel

1x Gas Detector

2x Cigarette Plugs

2x Bulkhead Mounted LED Lamps

2x 6v Deep Cell Batteries

1x 12v Start Battery

1X Yanmar YSE8 Inboard Engine and Shaft Drive to 10" Prop, on deck start panel and gear lever

Toilet on board but needs a pump kit

Sleeps 6

All squabs have been recovered but one was done backwards so will need to be re done.

 

Overall it needs some tlc. Would just like to see it go to a good home.

Currently on the piles at Kissing Point Marina Whangarei

Chris 0212572324

207409_1028678798133_6301_n.jpg

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...