Guest Posted December 10, 2011 Share Posted December 10, 2011 So....trying to replace the exhaust elbow on my migty bukh dv10...has a big split in it. Should be a straight forward job right? Alas, no. So, cant even get the elbow to budge at all. Manaded to move the locking nut about half a turn before stopping. No problem i thought...you can just unbolt the threaded stud off the back of the engine, and replace the whole lot if i cant seperate them. 3 of the bolts, no problem, but the one in the bottom left corner has an oil feed line up against it and is nearly impossible to get to anyway due to the elbow. Anyone out there done this before and can give me any tips. Getting very pissed off and trying to to pay anyone to do it if i can possibly help it cherrs dan Link to post Share on other sites
Guest Posted December 11, 2011 Share Posted December 11, 2011 oxy acetylene Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.