Island Time 1,235 Posted May 12, 2015 Share Posted May 12, 2015 Sea Blade SB20 to Make New Zealand Boat Show Debut The widely talked about and much anticipated Sea Blade SB20 will be released next week at the Hutchwilco New Zealand Boat Show, May 14-17. The new fibreglass Sea Blade model range is a joint project between Lancer Industries in New Zealand who will manufacture the vessels, with world acclaimed US Company Navatek providing the patented designs for these unique vessels. The SB20 Centre Console features an open and non clutter layout ideal for day excusions and fishing. The standard configuration includes features such as a 200L fuel tank, self draining cockpit, transom doors, passenger bench seating and underfloor storage with a large options list also available. The SB20 is able to be powered by single outboards from 90-200hp or twin outboards from 2 x 50hp through to 2 x 115hp. The SB20 hull will also be offered in a cuddy cabin variant at a later date. This first production model, fitted with a targa top has already been sold to a prominent New Zealand marine identity. Unlike a conventional Deep V which can lack stability the Sea Blade is supported by the outer amas. Sea Blade’s patented Ultra Deep V technology utilises a combination of longitudinal steps, chines and pads. This shape has been tested to improve lift, ride and performance characteritics A key change in the design is the increased lifting areas which reduce drag and increase ride stability. A fine bow and high deadrise allows the Sea Blade hull to slice through chop and waves. Slicing reduces craft pitch and airborne launch and the Sea Blade hull has been proven to minimize slamming force upon landing. The SB20 is the first of a series of production models to be built with other trailerble models up to 23ft. Sea Blade can also offer large non trailerable models up to 70ft. The SeaBlade SB20 will on display at the Hutchwilco New Zealand Boat Show, site EX08 at the ASB Show Grounds, Greenlane. ENDS SB20 Specifications: LOA: 6.40m BOA: 2.19m Draft (@DWL): .42m Displacement (@DWL): 2000kgs HP Min Single: 90 HP Max Single: 200 HP Min Twin: 2x50 HP Max Twin: 2x115 Speed: 40 knots. Caption: The first production model of the SB20 will be a centre console and will be on display at next weekend’s Hutchwilco New Zealand Boat Show. For Further Information: Lancer Industries Ph 64 (09) 837 1206 http://www.lancer.co.nz Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.