Battgirl 23 Posted July 4, 2017 Share Posted July 4, 2017 Hi guys how do you remove the dome head cap screws to get the prop off? I want to replace the anode behind it. Cheers Quote Link to post Share on other sites
raz88 96 Posted July 4, 2017 Share Posted July 4, 2017 The ones I've dealt with have had a hole through the dome/cone nut to enable removal. Check the direction of the thread and then either use the holes to jam or turn the done nut off Quote Link to post Share on other sites
Battgirl 23 Posted July 5, 2017 Author Share Posted July 5, 2017 Thanks raz88 job done thanks to someone who knows what they are doing ie part 1 remove 2 hex screws then tap out the 2 dome heads which are actually pins that go right through the prop blades. part 2 remove the split pin then the hub then the old anode. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.