Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 22/05/22 in all areas

  1. You might be able to line up one or more of the old holes with the new hole pattern, reducing the number of new holes needed. If you drill the new holes oversize 1st, then you can epoxy fill the old and new holes at the same time as described above, wait until cured, then re-drill the new holes to correct size taking care to only drill the epoxy fill. This way the new holes are epoxy sealed to stop water getting into the ply. Fairing might not be necessary if the holes are all covered by the new winch.
    1 point
×
×
  • Create New...