Cantab
-
Content Count
568 -
Joined
-
Last visited
-
Days Won
22
Content Type
Profiles
Media Demo
Forums
Gallery
Calendar
Store
Posts posted by Cantab
-
-
When your clipping on in the middle of the night during a gale to go forward to drop the storm Jib are you thinking
" gee this spinlock clip is nice and light, glad I paid a fortune for it, hope it holds"
or
"thank god I bought the Kong Clips, cheaper than those dodgy spinlock one too"
-
Very Very Carefully, you wont need much pressure to distort a tank.
Bubble test using a dinghy pump and a spray bottle would probably do.
Unfortunately one of the best fluids for finding a leak is Diesel.
-
7 hours ago, Island Time said:
Im not sure that that IS is spinlock clip
Found these articles, very informative, I think your right IT but apparently most clips on the market will do the same. You need to read all three to get the whole picture. Just read the last one if you need info on what to choose - hint Spinlock didn't cut the mustard in several ways.
https://www.practical-sailor.com/blog/safety-tether-clip-in-caution
https://www.practical-sailor.com/blog/tether-clip-update
https://www.practical-sailor.com/safety-seamanship/safety-tethers-under-scrutiny
"Based on our testing, a variety of locking clips that are certified as meeting the ISO 12401 Standard for racing sailing tethers, World Sailing Small craft – Deck safety harness and safety line – Safety requirements and test methods, do not appear to comply with the portion of the standard (quoted below) that is used to establish that the hook can not easily release from a fixed attachment point by accident."
-
1
-
-
So if the Spinlock Clips are not suitable for use on the required anchor points should they be acceptable for passing your category inspection?
Should the inspector (or YNZ and therefore Maritime NZ), knowing they are not fit for purpose, accept them?
In a perfect world they meet some ISO standard and would only ever be subject to a perfect load, by the time you have fallen off or been swept out of your boat you are a long way from a perfect world. Would be nice if your safety equipment could cope with that.
-
10% of 100% biomass is a lot more than 10% of the last 20% of a biomass.
Until fishing companies start increasing the biomass of a fishery, and then start fishing it, they are just talking sh*t and trying to get their hands on the last little bit by any means they can.
-
1
-
-
I agree DD that what you do is probably safer given the equipment on the market but:
From the safety regulations
"Through-bolted or welded anchorage points
or other suitable and strong anchorages for
safety harnesses must be provided adjacent
to stations such as the helm, sheet winches
and masts"If the shiny new tether you just bought at great expense ins't safe to use as recommended by the regulations it is not "fit for purpose" and shouldn't be on the market.
-
Someones getting paid off big time to keep these on the market.
-
1
-
-
6 hours ago, Adrianp said:
Where did you get a new one from? I've got a 15yo one that is just awesome and want to get a another one so I've got a backup.
The engine came from Marineworkz in 2016
https://www.marineworkz.co.nz/
This is a bit of a blurb about the engines, they are quite unique
https://www.boatsales.com.au/editorial/details/shortshaft-mercury-15-8840/
This is the 3rd new and newish Mercury I have owned in the last few years, including a late model 4 stroke. If buying again I would go straight for Mercury, very impressed with their quality and running performance, nothing like the engines of old.
-
I got a new American Mercury15hp 2 stroke. Its the one with the gear shift on the tiller, they are an old cross flow design still being made and sold, not the rebranded tohatsu. Very smooth, quiet and easy to start. Can handle low speed running too. Lightest 15hp available from memory. Well worth a look.
-
I did have to take my budget fully sealed LED stern light back to Burnsco, it was full of water.
It lasted one trip, no one could figure out how the water got in, it wouldn't come out again either.
-
Without getting all technical about it, I want one and I bet there's a whole lot of others do too.
I think the best flow on effect of the Cup foiling era has finally been well and truly realised.
"Hi rest of the World. What are your kids sailing these days?
-
18 hours ago, DrWatson said:
in general half the population are below average intelligence
That's what the definition of average is.
Unfortunately, having average intelligence is often not actually enough to make you very useful.
-
1 hour ago, Frank said:
so there is probably little or nothing to be gained from sailing anything other than a direct course downwind
Only if that's your destination, try going somewhere else and your Gennaker might surprise you.
Some Gennakers will happily sail wing to wing with the main, if you really must sail DDW then its a pretty handy option.
-
bet you one of the few lucky ones to hear that.
2 hours ago, Start Me Up said:wife wanting a larger boat
-
1
-
-
Most storms seem to bring a yacht or two ashore around Auckland, from what I can seethe required standards for moorings are a little bit behind most other parts of the country,
Pretty rare to see a boat brake loose up north since their standard were introduced, the ones I have seen have all related to failure of bits on the boat.
-
18 hours ago, Fish said:
The locals are protesting about something for a reason.
The stories I get point more to the demographics of the cruisers changing being at the root of the problem, locals using damaging the environment as a legit reason to try to gain control.
-
Think there may be some confusion here, I just asked for an "EASY MOOR FLOAT SYSTEM" from moorings Northland, I thought it was also called a easy bouy system, see the website https://www.mooringsnorthland.co.nz/productsservices/ not expecting any magnets.
Pretty sure its what the use in the Sounds too, similar to Fergie Bouy but with a soft buoy.
I've got a normal mooring too and rent another, both locations have strong currents and a bit rough at times, can be a battle on my own some days.
The Fergie and Easy Moor mean you don't have to lift any chain weight to get the headline up and on the bollard. Thought it would be worth a try.
-
32 minutes ago, Deep Purple said:
Hopefully Ken but if there is a loss (life or property) because of the failure of a 3 1/2 year old flare then the liability will be on.......
The YNZ inspector for Categories 1,2 and 3 for issuing a certificate when the flares didn't comply with the rule
or
The skipper for Categories 4 and 5 for declaring the boat complied with the rules when it didn't
Pulling a pretty long bow to hit that target, be pretty hard to put a loss of life down to a flare failure during a race. Have you read a Cat 1 /2 SI or NOR lately?
By the time your 3 different emergency response GPS linked tracking system buttons didn't work and your several expensive methods of communication have failed, and Epirbs PLB's etc, blaming a flare failure for a death is pushing it to say the least.
Lets get back to focusing on how to make sailing, and racing, more accessible and cheaper, not trying to stop people doing it because it might appear to be a little bit dangerous to a bureaucrat / Lawyer.
I do however agree that the wording of the regulations might benefit from review by someone competent in English and Logic.
-
1
-
-
7 hours ago, grantmc said:
They're some PR firm up north that are the mouth piece for professional sailing.
I'm up North and they aren't up here
-
Hears some stuff to think about, quickly done so I stand to be corrected, in each case I believe there are subtle differences as to who is initially meant to do what, some are similar to the extent the actions are the same but some are quite different. Granted by the stage collision is imminent both are required to avoid collision, untill then its not quite so simple.
- Two Motor Vessels on collision Course Head on
- Two Motor Vessels on collision Course 90 deg to each other
- Two yachts racing on head on collision course, i.e. 180deg to each other. Windward boat on Starboard.
- Two yachts racing on head on collision course, i.e. 180deg to each other. Windward boat on Port.
- Two yachts racing on collision course on same tack, one beating the other going down wind, beating boat on Port
- Two yachts racing on collision course on same tack, one beating the other going down wind, beating boat on Starboard.
- Two yachts not racing, on collision course, one is motor sailing, in all the above situations...
- Two yachts one is racing, one not racing, on collision course....
-
35 minutes ago, harrytom said:
Whether racing or cruising the collision rules will always over ride YNZ
HT, your just plain wrong, read the rules. I have already given you the clause and the link. Its what makes racing under RRS legal in NZ.
IT, I already pointed out your technical error, HT seems to have missed it.
-
-
10 hours ago, Jon said:
colregs are all about overtaking vessel keeps clear and passing port to port etc
Port to port doesn't apply between sailing vessels, often misunderstood, likewise turning to starboard to avoid collision.
The responses required of power driven vessels are different from that of sailing yachts, worth a read if your not to up with the rules, most of the time you are sailing it will be under the Collision Prevention Rules, quoting the RRS to your insurance company isn't going to help if you weren't racing.
There are a couple of upticks in this thread to statements that are not technically correct, good indication of lack of understanding.
-
7 hours ago, Island Time said:
Ynz cannot override the colregs.
Yes they can. it is explicitly says so in the NZ Rules. You must follow the NZ Rules with respect to vessels not racing but if you are racing under theRRS the "coregs" to use your term do not apply unless the SI say so.
Nothing in this Part applies to a vessel participating in a race or training or coaching in relation to other vessels participating in such an activity, if the participants have agreed to comply with the International Sailing Federation Rules, prescribed by the International Sailing Federation.
https://www.maritimenz.govt.nz/rules/part-22/Part22-maritime-rule.pdf
Sailing your boat from the Netherlands to New Zealand
in MarineTalk
Posted
I have my eye on some nice cruising boats in New Zealand, if you buy one for me I will happily sail it to the Netherlands for you to use after I am finished with it.