Compass Rose
-
Content Count
5 -
Joined
-
Last visited
Content Type
Profiles
Media Demo
Forums
Gallery
Calendar
Store
Posts posted by Compass Rose
-
-
Had similar problem, set up a pump that would reach into the bilge and pumped it all out then pored in water and bilge cleaner and let it soak and soften , agitated the mess and pumped it out again. repeated this proves many times until the water appeared clean. The pump I used was a long pump similar to a bike pump but it was a bit of a reach so try a diaphragm type bilge pump
-
Boat is a blue water cruiser 42 feet
Island Time, can you give me your contact details
David
-
Hi
I am researching for a new instrument/charting package for my yacht, the existing Furuno/ Nexus gear is now about 14 years old and while working does not have the capacity of the current generation.
Looking for suggestions of what I should be looking for and also recommendations on manufacturer.
Thanks in advance
David
-
Hi, I used to own Airobics also a Mk1 Gazelle. We had a failure in the seals of the hydraulic ram due to a bend in the spear (a previous owner had hit the bottom) we removed the system and had it repaired including a new spear. I would get the seals replaced and stick with the hydraulics, it is a simple system and you don't have to worry about electrics and batteries. To remove the system you will need to lift the boat off the keel using a travel lift. It is a good time to fair the keel and paint inside the keel box.
David
boat builder recommendation
in TechTalk
Posted
Try Paul Tingey 021 750 650