-
Content Count
14 -
Joined
-
Last visited
Content Type
Profiles
Media Demo
Forums
Gallery
Calendar
Store
Posts posted by TonyB
-
-
It's a Yanmar 2GM20. I see the manual says the gearbox is constant mesh gear with servo cone clutch if that helps. Gaining another knot in speed sounds quite appealing.... That's got me thinking! But in the meantime, fixed prop remains a bit longer.
-
Several people I've sailed with tell me I should be putting my engine in reverse gear when sailing to stop the fixed prop from rotating (while in neutral) and creating unnecessary wear. Others say it makes no difference. I'm wondering of this is just over caution or if there is something to it. Any thoughts?
-
Has anyone got hold of any Corrosion X Max Wax lately? I'm keen to give it a go on my prop. I've been trying to track some down but it seems as scarce as hen's teeth.
-
Ouch! Thought that might be the case. The boat is in the Tamaki River now, at the Panmure end.
-
-
When I bought my Smith 30 (variation of a Easterly 30) a couple of months ago I knew it had some corrosion around the base of the compression post. I cleaned it up and gave it some serious poking and it looked like there was still plenty of wall thickness on the steel pipe. I painted some anti corrosion galvanised paint on and thought it all looked ok.
On the recent trip from Opua down to Auckland we were off Whangarei Heads hard on the wind when a particularly strong gust laid the boat over and BANG! The rig shuddered hard and we got the sails down and motored into Urqurharts Bay. Strangely enough everything looked fine, including with an inspection aloft, but all the rigging had gone slack.
At the time I thought maybe the baby stay shackle at the mast end had rotated and shaken the mast, but yesterday I found that the compression post has a fracture line about 2 mm wide around the full circumference. It must have dropped slightly as the mast step pad has compressed. The deck is glassed ply.
Wondering what to do now. Can anyone recommend some ideas or the right people to give advice?
Blue lights
in MarineTalk
Posted
I use a deck level solar light but it’s a powerful one that lights up the deck and looks brighter than many that are wired in. I understand that the cheap dull ones are inadequate but it seems that a nice bright solar light is a good way to go?