[Lyttelton sad]

Very sad yesterday to see a beautiful yacht broken up by a digger and off to landfill. Te Arawa was a Stephens design(presume that is S&S) of about 41' that had seen no maintenance for ages. Some planking had worn against a pile and deck had a hole from a pile, but could have been saved. The Naval Pt Marina wanted her gone (too big , and danger to their structure) Unpaid mooring bills? Surprising just how little worth saving-dinghy, few blocks, lead, was about it.. Impressed by how roomy below, and  no wineglass shape, very much Vee shape and lead about 18"w / about about 12" high. Reputedly built in Sumner.

[Anchir winch/up mast]

Thanks for all that. Now I had hoped to go up mast via the anchor winch  but the 60a breaker tripped out quick. 600-800watt old NZ winch. 2;1 purchase on the halyard. So to go up mast do I need a gruntier winch or do I need a bigger circuit breaker?

Thank you

[Those fancy jumpstarters]

Any recommendations for them, for emergency start they would be invaluable. And failure to start is a bad nightmare. Anything one should know?

[Winch handle size]

Hi, shunting this to the top so the offers are not forgotten

[Winch handle size]

I measure the standard handle at 17mm, and need a 7/8' handle

[Winch handle size]

Thanks Ed. Will look at some hex headed bolts and see if possible to fab something

[Winch handle size]

Didn't know they came in big and small (and not talking handle length) So how scarce are the big ones? Do they come up on Trademe? Need a big one for a big Nilsson winch

[Winch bases]

Any suggestions on how to make a pair of bases that will bolt onto deck and coaming side, about 220 high. They will be prob be half round.Any material OK. Any ideas please?

[Anchor windless too fast]

Old Nillson 800? rotates far too fast.Can anything be done to slow it down? Thanks

[Newish Beta 14hp diesel engine might be available @ 65% of new cost]

Well how about hydraulic drive on the back of the diesel. There must be plenty of secondhand pumps /drive units off all the scissor lifts etc?

[Dicky gearbox]

I have an Arona(?) box that wont grip at all. Can you machine the cones.They look ok of course and the grooves are fine

[Engine too hot]

Well, had a hose jammed into the header tank with about 2' of head, and there was an almighty burp and hot water flying and since then all good. Must have been an airlock in the system.

[Engine too hot]

Thank you. Belt tension good. Will check out the thermostat is working correctly. When pump spun by hand a couple of bubbles appear each time in header tank. But it just doesnt feel right when spun, backwards or forwards. Shouldn't I detect something? Have removed the 4 holding bolts and it just wont come off. It will break first

. Shoved a plastic hose up the int pipe and gently turned pump but didn't feel anything (it was far enough in to touch the vanes , if they were there. Thanks for those ebay things, close but not quite identical.

[Engine too hot]

Thanks. We're talking the Shibaura fresh water pump is bust I think.The Jabsco pump is fine.

[Engine too hot]

Am thinking pump stuffed, and the cover plate is go to shatter if I persist anymore at trying to remove. Removed thermostat and no difference. So am thinking how about buying a 12v. water pump? Any reason why that wouldn't work? So what would I buy? Thank you.

[Engine too hot]

Little Shibaura 2 cylinder I added a heat exchanger to myself. Now she is overheating. Why would that be? Water coming out of exhaust. Exchanger feels cold.Any tips? Thanks

[Laptop charging]

Is it OK to use an inverter to charge a laptop, phone,drill battery etc?

[Anodes]

What is the latest thinking on placement please? Wooden yacht, bronze prop, stainless shaft etc. No anodes at all at moment- about to launch

[Television on board]

Is it worth having? Remember in the past the reception was diabolical at anchor. Has it improved at all? Any recommendations?

[Health and Safety in the Marina]

Used to be, you'd be in the smoko shed and always you'd find pamphlets from Labour Dept with the latest accident reports and what caused them. Nowadays you just see mention of accident in the paper but without any reasons about the cause. So you dont learn anything. Bloody hopeless.

[WANTED: P Class Mast and Boom]

Chch here if a

ny good to you

[spinnaker size?]

Hi think mast is 31ft above deck (written down somewhere). So need a spinnaker and what length would the luff need to be? Thanks.

[chillybin size?]

What size needed? Room for 2 bags of ice plus milk and bit of food?'

[Windward Sails - are they OK?]

Windward Sails. Paid $1360 10 weeks ago and so far just receiving excuses as to when it will arrive. Always next week, now he says it is in transit. With the excuses so far, I'm not sure I believe him, I'd like my money back. 

 

Anyone here have experience of them?

 

This post has had a title change and it's language moderated by site moderator.

[Wanted - BUKH 20 Gearbox]

My experience- these boxes off Bukhs have a nasty habit of rusting? up. Anyway, if not used continuously, often the box will be kaput