Young Entertainer 59 Posted August 15, 2017 Share Posted August 15, 2017 got an ISOtherm diy 2017 kit which is the compressor, the thermostat controller, shore power kit and 1m evaporator plate that has been bent to fit a 1020 cabinet. Cost close to 2k 2 years ago but i am looking at replacing the entire lot so it is up for offers. Can be seen running in the boat and you can be there when it is uninstalled if you want. I havent made a final call on the new options so will decide if it is sold or reused based on offers. If you want the stainless cabinet which has a Freezer and Fridge on the front you can have that as well. Freezer gets down to -25 if you want it to. And that was with only 45mm insulation. Quote Link to post Share on other sites
Steve Pope 243 Posted August 18, 2017 Share Posted August 18, 2017 can you send me a message with the dimensions of the freezer / fridge cabinet, od and id (capacity) Cheers, Steve Pope, (or email : pappas@xtra.co.nz) Quote Link to post Share on other sites
Young Entertainer 59 Posted August 20, 2017 Author Share Posted August 20, 2017 Sorry going to be repurposed now I know how much stainless costs!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.