ex TL systems 63 Posted April 29, 2019 Share Posted April 29, 2019 Looking at screwing some brass rubbing strips underneath the stub keels on a cat. It will be screws through glass into timber so I will drill oversize holes filled with epoxy glass mix and then screws into that to keep the timber sealed. Will stainless screws work or should I use brass to minimise corrosion of dissimilar metals. Quote Link to post Share on other sites
wheels 543 Posted April 29, 2019 Share Posted April 29, 2019 Silicone Bronze. Never plain Brass. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.