Quarterback 1 Posted October 5, 2010 Share Posted October 5, 2010 Save the Raven 31 moulds, they need a new home by Sat 9th Oct or it"s the cutoff saw Link to post Share on other sites
Guest Posted October 6, 2010 Share Posted October 6, 2010 Anyone know where the Elliott 7.4 moulds might be lurking? Link to post Share on other sites
Guest Posted October 6, 2010 Share Posted October 6, 2010 I was told that Ian Margan had a clean out several years back, and those and the 1050 moulds are now gone. If you do prove me wrong and find them, I do have a copy of the build specs and sked. good little boats Link to post Share on other sites
Guest Posted October 6, 2010 Share Posted October 6, 2010 Save the Raven 31 moulds, they need a new home by Sat 9th Oct or it"s the cutoff saw why?? Link to post Share on other sites
Guest Posted October 6, 2010 Share Posted October 6, 2010 You hit the nail on the head there L4. If you are building a new boat, why start with a 30 year old design? The cost isn't in the hull, it's all the shiny, flappy bits. Link to post Share on other sites
Fogg 427 Posted October 6, 2010 Share Posted October 6, 2010 That was my thought exactly, the ones that are alive today are ok-ish and seem to make their owners happy but really why would anyone want to build a new one today?! Link to post Share on other sites
Guest Posted October 28, 2010 Share Posted October 28, 2010 Can't remember if it's the Y7.4 or the E7.4 moulds in Warrnambool Victoria along with a set of Bull moulds. Drop me a line to remind me. Link to post Share on other sites
Guest Posted October 28, 2010 Share Posted October 28, 2010 I tracked down the NZ E7.4 moulds.....chopped up about 4 years ago about the same time as the 1050.....if you have another set I could be interested. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.