Maca 4 Posted July 15, 2020 Share Posted July 15, 2020 The instruction sheet says replacement should only be by a qualified watchmaker. Has anyone had a go themselves or have they had a good experience with an Auckland based watchmaker? My concern is that if it's not done properly it will always leak. 8. BATTERY REPLACEMENT The watch and timer battery should be replaced by a qualified watchmaker. Watch: 1x CR2032 3.0 volt Lithium battery Timer: 2x CR2032 3.0 volt Lithium battery Quote Link to post Share on other sites
whitepointer 34 Posted July 15, 2020 Share Posted July 15, 2020 Do it your self it’s not hard, remove small Phillips screws , open and replace battery, I’ve done it twice on mine, no issues Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.