grant 40 Posted June 14, 2013 Share Posted June 14, 2013 Before I try the chandlers I thought I would see if anyone here has a spare stay adjuster like the one in the photo. It a Ronstan, don't know the part number. Also the pins for the stays are different thicknesses at each end, what sort of pins usually go through these as I haven't seen these before. thanks Link to post Share on other sites
Guest Posted June 14, 2013 Share Posted June 14, 2013 It's a Ronstan RF45 or copy of. The packaging is likely to say on the back 'Not intended for use under load' or similar. We did find that rather funny with it being a fitting that hold ya frecking rig up. We suspect a lawyer ticked off the wording :) Link to post Share on other sites
The Saint 0 Posted June 15, 2013 Share Posted June 15, 2013 May do, I will have a look when I get home and give you a call Link to post Share on other sites
grant 40 Posted June 15, 2013 Author Share Posted June 15, 2013 It's a Ronstan RF45 or copy of. The packaging is likely to say on the back 'Not intended for use under load' or similar. We did find that rather funny with it being a fitting that hold ya frecking rig up. We suspect a lawyer ticked off the wording :) they managed to spell both Ronstan and Australia correctly so i'm guessing it is real one. packaging? didn't come with any of those flash accessories Link to post Share on other sites
grant 40 Posted June 15, 2013 Author Share Posted June 15, 2013 May do, I will have a look when I get home and give you a call cool, thanks Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.