jonathan
-
Content Count
203 -
Joined
-
Last visited
Content Type
Profiles
Media Demo
Forums
Gallery
Calendar
Store
Posts posted by jonathan
-
-
and what do you prep and fill with under water based?
-
I want to paint the deck on my hans christian 38, lots of teak so not that much deck.... I want to use a non solvent water based polyurethane. But i want a high gloss white finish, will be mainly brushed.
What brand? I like the look of the altex elite but don't really want the solvent hassles is it worth it, can you get same finish with water based.
-
what do you put as your home port?
-
So my charger (via gen-set) charges the current AGM at 49Amps dead flat, if i put the a 180ah into the boat it would meet the initial C10 33% 50amp charge, did anyone establish what happens if you go below this?
-
-
ok if I wanted to build a carbon fibre sphere, say about 800mm diameter, lets say I had a mould (1/2 sphere....) how much would it cost to make each one in materials... doesnt have to take much load, for the inside of a custom globe....
question 2 , what would be best material for the mould???
-
great result, damn lucky
-
also from those who have ac systems onboard.... how much did your eWof cost you?
I am a 120V boat, I feed 240 into a full isolating step down transformer then into the boat via a decent system, from there charge 12V run fridges etc etc...
-
I only have an immediate need for 3rd party but if reasonable would consider a bigger policy...
will try baileys now
-
hi, I normally berth on piles in Tamaki river, but have been offered a berth at Westhaven for a while, I need insurance, I don't want to get a full survey done etc, what are my options, feel free to ring me on 021 380 611 Peter
1982 Hans Christian 38 yacht
Looking for a eWof person as well
-
isn't most 4 stroke lawn mower oil 10 30
-
I have been on piles in Panmure for 8 years, you get very used to no shore power, just go solar
Sad for the racing boats that need a dehumidifier tho, feel better about leaving westhaven now
-
i would remove the secondary filter (after lift pump and put another in.... just in case seals not good, not much to those seals, any diesel on engine around injector pump?
-
thinking a go pro it was not safe
-
I keep my boat up at Panmure there are a lot of idiot mustang power boat owners that blast past you doing 10 knots , almost every trip....
I fully support robust enforcement of 5 knot speed limit
- 1
-
-
-
I will stick with Pactor for now...
-
turn it over and sprey hits of CRC engine start into the air intake.... remove air filter... you will get minor knocking but the engine will actually run this way
I can bleed me Perkins 4108 this way and they are bastards to manually bleed
-
CRC engine start goes a long way in situations like this, I always carry 2 cans just in case, has save my ass offshore, the comment about a good battery is spot on, more amps = higher compression = easier starting every time.
-
been here water blaster and washing up liquid then a hose with sprey head.....
blaster creates foam... its your friend in this case
-
-
wow those are some sexy hose clips.....
-
i have coloured things in my chain every 10m....
cost F all, about to install the relay thing, styill going to run a wire tot he helm, not that keen on remotes, i am either going to be at the helm or up front while anchoring where the foot controls are anyways
Solar panel doesn’t appear to be charging.
in TechTalk
Posted
my one is 26V open