Jump to content

Westhaven Divers


Guest

Recommended Posts

How on earth would swim in Westhaven unless they had a specific need to? In my case that specific need is I was generally the smallest or the slowest so I get to scrub the bums....... in which the head is under a lot.

 

Being electrocuted never crossed my mind but then the growth in shore power connections is reasonably new.

 

Swimming in westhaven is not a regular activity granted but diving is.

 

but hey some people may want to swim there?... after all the TBT levels are way down and there is less chance of growing an extra Testicle.

 

And.... the greens want us all swimming in every river and westhaven will be next. yip... clear them boats out Normans in town!!!

 

you can see it know!.... Pure 110% NZ and Nobody here/bankrupt!

Link to post
Share on other sites

Ok if anyone is thinking of a clean this week for the SANZZ series on saturday 9th. Please ask now rather than last minute so we can organise ourselves.

 

cheers

Link to post
Share on other sites

I ran across this this morning from the Racine Yacht Club in Wisconsin where I'll be racing the next couple of weekends... http://www.racineyachtclub.org/reefpoint/2014/rp201407.pdf

 

Cautionary notes: It is not safe to swim in our dock system. It

is not just our system; it is ANY electrified dock system or a

pier serving those with on-board generator sets. I have been a

long time marina swimmer and see this with much

disappointment. Here’s the rub: Only very tiny amounts of

current are needed to induce Electro Shock Drowning (ESD).

Through faulty wiring in the dock infrastructure or bad

bonding/grounding on individual boats, current leakage of as

little as 15 mA (milliamps) can lead to paralysis and drowning.

 

Now the facts. We made out first full pass on the slip system

with equipment to test voltage and current flow on individual

boats and “stray-current’ in the water surrounding our finger

piers. Our results were surprisingly good. With the lead of Bob

and Carol Kunath, several hours of testing showed the vast

majority of the slip system in the ~2-3 mA region. Is this safe

enough to swim? In a word, no. On the related topic of the

beach and the children who wade in the water: We can’t say

that is safe but if there was current leakage from the slips in

that proximity, the intensity drops rapidly as distance increases

(I=1/d^2). Our measurements in the beach water were -0-mV

and -0- mA.

 

There are things that the average person can do to minimize

the risks to other boaters and other boats. Buy a polarity

checker and use it. Make a visual check of the condition of all

plugs and receptacles. Burned or charred prongs are a sure

sign of trouble and they should not be used. Use ONLY

grounded cords and make sure that cords stay out of the water.

If you see a cord in the water, rectify that condition or contact

somebody who can cut the power, and safely secure the shore

power cord. There’s a lot more to this issue and we have to

develop some guide lines and procedures to insure we have a

safe environment for all of our members and guests

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...