MikeL 1 Posted September 15, 2020 Share Posted September 15, 2020 Has anyone used Carbon full length battens to help reduce the weight of the sail when hosting etc. Have a Farr 1020 with 4 x full length battens (1.5m - 2.5m - 3.5m and 4.2m long) Expensive to buy new. Is there a second hand market for carbon battens? Quote Link to post Share on other sites
MartinRF 53 Posted September 18, 2020 Share Posted September 18, 2020 I have 35-ish years of experience of a fully battened mainsail (square top at that for the last 22 years) of about 30 sqm and I don't think the weight of the battens is what bothers you if you have problems hoisting your sail. I would take a look a at what I could do about friction. In my case it helps a lot to clean the luff grove of the mast. Batten pocket hardware and how the sailmaker positioned it relative to the bolt rope also plays a sigificant role. All this assumes bolt rope in luff groove. Dirt and friction are factors regardless. /Martin Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.