Adrianp 124 Posted May 19, 2023 Share Posted May 19, 2023 Is there anywhere in Auckland that might actually repair a blown diode in a Rectifier? I have two Balmar 175a Rectifiers with a single blown diode each. Before I bin them, it'd be nice to see if I can one or both repaired to have as a spare? Unfortunately they changed style of Diodes, so it's not quite as easy as pulling a good one out of one and sticking it into the other. Quote Link to post Share on other sites
Adrianp 124 Posted May 19, 2023 Author Share Posted May 19, 2023 The bottom one was actually repaired by the Auto electrician in Savusavu but hasn't been tested and looks a bit rough. Quote Link to post Share on other sites
aardvarkash10 1,070 Posted May 19, 2023 Share Posted May 19, 2023 They appear to be pressed in. Most larger auto electrical workshop should be able to do this Quote Link to post Share on other sites
waikiore 451 Posted May 19, 2023 Share Posted May 19, 2023 Enertec seem to be doing a bit with Balmar now Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.