Jump to content

Clipper

Members
  • Content Count

    2,891
  • Joined

  • Last visited

  • Days Won

    54

Everything posted by Clipper

  1. I'm working on it. I understand Freeeeeeeedom should be getting a call from the maintnece contractor too, with regards to an official height. The allowable heights shoud be on the structures, but it is a bit late when you get there to see if it is too low... I'm confident 8.5s will be fine, would be waiting for something official befoe planning your trip though Tim. I'll give you the story up at marsedn cove.
  2. was that something you weren't supposed to share? Just being sensible (arse covering). I worked out a safe height, and can talk about things offline, but it may be on my head if the info I provided was out there on the net and was misused. The appropriate way to get the information is to ask Transpower, who can officially reply. Its all good for 8.5s though, I will talk to you about your mast height when I collect my new go fast storage bags.
  3. if we are free whenever its proposed, I'm keen
  4. Charts for the area should gve the official clearance, but I will look it up as well. Not something you want to hit with an ali mast, especially me - how would I explain that on monday morning...?
  5. Clipper

    Shaw4

    Guess you're allowed an opinion. My opinion of you has gone downhill in a big way....
  6. Clipper

    Shaw4

    Based on what?
  7. Perhaps a bit of an unusual one. This weekend we began to ressemble a Tower for destruction test, after minor failure in early tests. I'm in a testing station in the desert, outside of Riyadh.
  8. Clipper

    timberwolf

    That is funny stuff
  9. Great Post Smithy. I se what Paddy is saying, but I strongly disagree
  10. Clipper

    timberwolf

    Not sure what your point is (other than trying to sound like a know it all). Top speeds are fun, and no one said "we sailed around the track at 30 knots" On Voom we finished over an hour behind you, but from our GPS track, we averaged 11knots over the ground, you would have had to average a fair bit more than that. Our top speed on the GPS was 21.5 under kite, 19.8 when 2 sailing with 2 reefs and the storm jib. Of course there is lots of slow times.For us, it was the bottom of every one of those steep waves, or the turning around for 24 minutes to search for and pick up the hatch
  11. Does anyone have any suggestions for good site to order gear from overseas?
  12. Clipper

    timberwolf

    thats a pretty eclectic collection of multis! All different bow shapes and cabin shapes and lack of cabin shapes. Very cool.
  13. Clipper

    timberwolf

    Awesome. There goes my record!
  14. Clipper

    timberwolf

    I thought the last Ac proved you needed a wing. If you were looking to argue a tri superiority within a rule, look to the ORMA developements whihc were nearly all tris for a reason. Boats designed within a rul all tend to end up similar over time as the best option becomes apparent. You have an open boat - is a tri really the way to go...?
  15. Clipper

    timberwolf

    I vote new main hull. Probably cheaper than new rig and sails too...
  16. Clipper

    timberwolf

    last nights rum race. Just awesome reach from orakei to torpedo.
  17. Clipper

    timberwolf

    Massive thread drift I know, but did you know your old 7.4 now lives in windy welly? I saw her at evans bay a few weeks ago. Tim, Timberwolf did look awesome for the few seconds we saw before you were gone...
  18. Saturday: Picked up mainsail with new reef point from Bill, took that and the book out to voom and fitted. Put on wetsuit and cleaned the bottom. Kinda chilly. Tried to fix winch, got grease everywhere, failed to fix winch, took winch off and home. Tried to fit new watertight bulkheads, bolts too short, gave up. Replaced starboard nav light, worked out somewhere to temporarily set up cooker so we can have a hot drink if the simrad 100 is a long slow one Sunday: Fitted bulkheads this time after getting new bolts! Finished ‘proof of concept’ version of temporary shelf for cooker. Mowed la
  19. So instead of working on the mini, you sulked in your room...?
  20. Clipper

    timberwolf

    Mast is fine, amas look too long...
  21. Clipper

    timberwolf

    New Mast, or repainted old mast?
  22. Clipper

    timberwolf

    Wow. Can't wait to see to see that all finished up. I presume you are building a new rig too. When will she all be ready to splash?
  23. Clipper

    timberwolf

    Lookin good tim - cant wait to see her all painted up and back on the water.
×
×
  • Create New...