Island Time 1,239 Posted December 3, 2016 Share Posted December 3, 2016 I have a customer who snapped a prop shaft on his 35ft twin launch this weekend. Can anyone recommend an engineering company to make another? He's at Gulf Harbour. Quote Link to post Share on other sites
Dtwo 157 Posted December 3, 2016 Share Posted December 3, 2016 Chatfields Engineering. Good guys. http://www.chatfieldmarine.com/shop/Driveline/Propeller+Shaft.html Quote Link to post Share on other sites
marinheiro 352 Posted December 4, 2016 Share Posted December 4, 2016 Gordon at Craftmaster Marine (in Yachtspars shed at Kumeu), ph 412 - 2251, made my shaft and machined prop taper and keyway when I re-engined Quote Link to post Share on other sites
Guest 000 Posted December 4, 2016 Share Posted December 4, 2016 Gordon at Craftmaster Marine (in Yachtspars shed at Kumeu), ph 412 - 2251, made my shaft and machined prop taper and keyway when I re-engined Did the same for me when I re engined the Cav 39. Don't personally have the engineering skills to evaluate his work but he was recommended to me, delivered on time and I had no complaints. Quote Link to post Share on other sites
Romany 162 Posted December 5, 2016 Share Posted December 5, 2016 My vote for Gordon too. He is not afraid of the tiny wee jobs also. Machined a donut anode especially for the back end of a Townson and also delivered on time when he said and was very reasonably priced. 1 Quote Link to post Share on other sites
Island Time 1,239 Posted December 5, 2016 Author Share Posted December 5, 2016 Thanks guys, I'll pass on these details... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.