Myjane 40 Posted April 11, 2017 Share Posted April 11, 2017 Ok helping a mate on his beautyfull d/d kauri hull boat today , in the bulges is ever dured shinny kauri you could eat your dinner off clean and tidy for a 40 year old pro built yacht , he ever dured some 20 years ago , dry boat well venterlated , saw dust in the bulges , so he found three or 4 places of planks comming out from the keel plank a tad damp and bubbling up like delaminating ,they sad up o kill and we can treat again , so it's timer electrolis what can not do ,the electrical systerm is dead one leave the boat, one zink on the shaft , answers please Quote Link to post Share on other sites
waikiore 445 Posted April 11, 2017 Share Posted April 11, 2017 Design of boat? how many zincs? what is bonded too them?Where does boat live? Quote Link to post Share on other sites
marinheiro 359 Posted April 11, 2017 Share Posted April 11, 2017 Chris Mc Mullen is the guru on this. You would be able to get in touch with him via Waitemata Woodies Quote Link to post Share on other sites
Myjane 40 Posted April 11, 2017 Author Share Posted April 11, 2017 Hi one zink on the inch shaft . No bonding of skinfittings they are bronze only 4 ,engine is new on modern feet. Batterys have the push in turn switches that are all ways off when bot is unattended and dashpannel also has a breakers switch New bronze Volvo three blade folding prop antifouled xmas and zink replace hardly worn boat is an 80 s monocok two skin kauri glassed. Frames are laminated kauri 70 x70 rivit and rove bronze pins through boat , all clear everdure in furniture Finnish Quote Link to post Share on other sites
Guest fng Posted April 12, 2017 Share Posted April 12, 2017 https://waitematawoodys.com/2017/03/28/the-most-referenced-viewed-story-on-waitematawoodys/ Here's a link one artical, there should be sub links at the bottom to other articles. Ideally you cut the rotten stuff out and scarf in new timber. Not the easy in some cases. There are other ways, but they need to be looked at on a case by case/area sort of thing. 2 Quote Link to post Share on other sites
Myjane 40 Posted April 12, 2017 Author Share Posted April 12, 2017 Hi it's not rotten and pulling away they were bumps in the floor we have dried them out , sanded up and looks like New flooded with everdure with a hot fan heater drying , befor and after the expoxie it should help we think Quote Link to post Share on other sites
wheels 543 Posted April 12, 2017 Share Posted April 12, 2017 That's good news.I was struggling to think why you had an electrolysis issue where you described, but stayed out of the thread because I didn't feel expert enough in the discussion re timber vessels.You can rely on fng's help and that article is great. Quote Link to post Share on other sites
Myjane 40 Posted April 12, 2017 Author Share Posted April 12, 2017 Ok days ahead , ever dured dry , but in the mornings there is condensation on these areas , dam it ,not sure what to do , Quote Link to post Share on other sites
Guest fng Posted April 12, 2017 Share Posted April 12, 2017 Photos would have helped Condensation may be salt related. There' clean and dry and then ...... Bit difficult to comment without a visual of the area Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.