Jump to content

WTB, 1/4 or 1/2 sheet of ply, 4mm or 6mm

Recommended Posts

Before I head off to beg with a merchant, has anyone in South or East Auckland got an offcut of thin marine ply that want to get rid of?

I have two small soft spots in the cabin top that I am going ot cut out and repair with a drop-in block, epoxy and glass.  Its on a curve (bloody hell...) and relatively narrow (2 areas about 100 x 100mm each) so I will need thin stock to be able to get the curve approximately right.

Not fussed about the timber as long as its marine grade - it'll be hidden under a few layers of evadure and paint.

Pay in Kash or Bottles of the Realm.


Link to post
Share on other sites

go see this guy,sth AK right?? holmes rd manurewa     Have brought,begged ply off him and free advice on how too.

 27 Holmes Road, Manurewa, Auckland 2102
South Auckland Boat Repairs


  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...