Black Panther 1,568 Posted December 27, 2021 Share Posted December 27, 2021 After washing the birdshit off the deck yesterday with a bucket and broom, the brains trust has decided we should have a saltwater wash down. I happen to have a spare thru hull from removing the 3rd toilet. So what comes after that? A strainer. What sort of pump to deliver enough water? How to get the hose up through the deck? Thought I'd be smart and ask rather than try to invent something. Quote Link to post Share on other sites
Island Time 1,211 Posted December 28, 2021 Share Posted December 28, 2021 Min 45psi, this is ok, https://www.burnsco.co.nz/pr-pump-wd-12v-60psi-15lpm-jabsco-kit Quote Link to post Share on other sites
ex TL systems 63 Posted December 28, 2021 Share Posted December 28, 2021 Best chance of being able to put out a fire on a boat too without having to go into the smoke. 1 Quote Link to post Share on other sites
Jon 355 Posted December 28, 2021 Share Posted December 28, 2021 I have mine plumbed into the anchor well with a hose barb in the top of the bulkhead, then if it gets turned on by mistake it runs into the well and drains. I run a short hose (2m) to wash off anchor chain if needed and also connect a 20m garden hose if I need to wash the decks 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.