Tiller 0 Posted April 19, 2012 Share Posted April 19, 2012 free 6.5mt hull ex P.E hull only can deliver or she will be cut up. Quote Link to post Share on other sites
Atom Ant 0 Posted April 19, 2012 Share Posted April 19, 2012 Putiki Express? Quote Link to post Share on other sites
203 0 Posted April 19, 2012 Share Posted April 19, 2012 Hmmmm This could be my chance to start building a first boat.... Quote Link to post Share on other sites
Guest Posted May 2, 2012 Share Posted May 2, 2012 If I am correct, P.E is a David Tiller (Tiller in crew.org - he designed / built Truxton) design. A little 6.5 canter I think?? Was sailing in last SIMRAD small boat div. By ex. Im not sure whether he made a second one or its a mould etc... Quote Link to post Share on other sites
Guest Posted May 2, 2012 Share Posted May 2, 2012 I could be completely wrong on the other hand! Quote Link to post Share on other sites
Guest Posted May 5, 2012 Share Posted May 5, 2012 It goes like stink downwind, we were doing 14-16 on the GPS with the masthead spin up and they went past us in a massive cloud of spray. It looked like steam was coming off the bow. Race 2 of the Simrad 2011 i think, heading north to Haystack. There was a bit of carnage on that leg, had to take the pole, kite and sheet home to the workshop to press the Jib clip out of the parrots beak. Quote Link to post Share on other sites
Quarter Pint 0 Posted May 16, 2012 Share Posted May 16, 2012 Tiller, is this still up for grabs? Where is it? PM me or give me a call 012 347 145 cheers nathan Quote Link to post Share on other sites
Tiller 0 Posted May 18, 2012 Author Share Posted May 18, 2012 Still have the hull but if no one wants it off to tip Building new boat at moment but also have plans for a 10.5 yacht that i was going to build but have altered my thoughts. 10.5 at 3500kg have keel design too, the boat has a chine. Quote Link to post Share on other sites
Guest Posted May 18, 2012 Share Posted May 18, 2012 so what is this hull any pic's? Quote Link to post Share on other sites
Tiller 0 Posted May 18, 2012 Author Share Posted May 18, 2012 cant seem to upload photo Quote Link to post Share on other sites
203 0 Posted May 18, 2012 Share Posted May 18, 2012 Tiller, send the photos to stephen via email, and hell upload them for you Aye stephen! Quote Link to post Share on other sites
rigger 47 Posted May 18, 2012 Share Posted May 18, 2012 images. a picture of 6.5 hull design of 10.5mt Quote Link to post Share on other sites
Matty 0 Posted May 18, 2012 Share Posted May 18, 2012 that is an awesome looking boat, would be a shame to see it go to waste! Quote Link to post Share on other sites
Quarter Pint 0 Posted May 18, 2012 Share Posted May 18, 2012 Tiller, more tha. Happy to take off your hands. My number was wrong, it's 021. 347145. Cheers nathan Quote Link to post Share on other sites
203 0 Posted May 18, 2012 Share Posted May 18, 2012 Hey Nathan, Tell us the outcome Quote Link to post Share on other sites
203 0 Posted May 18, 2012 Share Posted May 18, 2012 although, It would be a good project to take on for a few years! Quote Link to post Share on other sites
col j 0 Posted May 18, 2012 Share Posted May 18, 2012 i can see nathan digging into my skillset in the near future. but we did beat it sometimes in the 2 handed on the mighty 727 (bashing to windward). looked like it could have done with a bigger headsail. and some upwind weight. add some water? recon it'll carry 727 rags plus some. we been trying hard to break a 727 and cant but there is still time yet. have a go breaking this now. Quote Link to post Share on other sites
203 0 Posted May 18, 2012 Share Posted May 18, 2012 looked like it could have done with a bigger headsail. and some upwind weight. add some water? recon it'll carry 727 rags plus some. . Nah, just a big square top and big gennys will work Quote Link to post Share on other sites
Tiller 0 Posted May 18, 2012 Author Share Posted May 18, 2012 in the ssanz race we had good ride to haystack but sheared bolt stopping keel swinging for and aft so nursed it home without destroying centrecase. Only had 150 kg on c/b bulb. 1800 down. Quote Link to post Share on other sites
col j 0 Posted May 18, 2012 Share Posted May 18, 2012 Did not know that but that would do it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.