Farr 1220 toe rail

[Rascal 0]

I am purchasing a Farr 1220 on the west coast of the US and I am trying to find some toe rail  fairlead castings for it.   I have found the Toe rail is still extruded by Ullrich Aluminum and hoping someone is still making castings for it somewhere ???    I been scouring the internet but coming up short.  any insight would be helpful. 

Thanks, Joe   

 

[Rascal 0]

Tamure, 

Had a look and looks like they shut down operations in 2019.    

 

Thanks

[Island Time 1,313]

Ive had a look around, as I replaced the toe rails on IT (Farr Phase 4) with the same ones as a 1220 about 18 months ago. I could not find anything unfortunately.  If you do, let me know!

[mcp 36]

https://www.mecca.co.nz/Products/Marine-Hardware/Fairleads/

[Rascal 0]

On 20/02/2021 at 1:21 PM, Island Time said:

Ive had a look around, as I replaced the toe rails on IT (Farr Phase 4) with the same ones as a 1220 about 18 months ago. I could not find anything unfortunately.  If you do, let me know!

Island time,  I have 1220 hull #1  and they used the 1415  toe rail Also been told they used 1519 on the 1220 as well.   depending on which one you went with check with John Bennett at Sparloft.  He had a casting that worked for my style.   

 

[Rascal 0]

On 20/02/2021 at 3:14 PM, Tamure said:

ok, try asking around, John Bennet at Sparloft

Tamure, 

 

Thanks, John ended up being the correct person to chat with.  Figured  with enough digging would find someone who would know. 

[Y88 5241 28]

Try Mike Pearce boat builders