wheels 543 Posted October 22, 2015 Share Posted October 22, 2015 In some conditions when I am going downwind, I pole the Headsail out one side and the Main out the other. I made my own pole to do this, but have always wondered if there is a ratio of Pole to Headsail to obtain the correct length. I assume there will be some kind of sum gained from the measurements of length of foot of Sail and distance back from clue to mast. Anyone know how to work that out? Quote Link to post Share on other sites
Guest Ketchup Posted October 22, 2015 Share Posted October 22, 2015 Long enough set the sail Correctly?. Which I would think would be to project the maximum sail area to the wind? Quote Link to post Share on other sites
markm 30 Posted October 22, 2015 Share Posted October 22, 2015 about 110 - 120% of the length of J (distance from base of forestay to mast), may be a bit less if it's a non overlapping headsail. 1 Quote Link to post Share on other sites
Guest Ketchup Posted October 23, 2015 Share Posted October 23, 2015 what about an adjustable one to suit every sail size. Quote Link to post Share on other sites
RushMan 31 Posted October 23, 2015 Share Posted October 23, 2015 about 110 - 120% of the length of J (distance from base of forestay to mast), may be a bit less if it's a non overlapping headsail. The pole on Fineline was longer than J, I guess out about 110%. To pole out the non overlapping headsail coming back from Coastal, we used the leeward stanchion base and a sail tie as the inboard end. It seemed to work. Quote Link to post Share on other sites
wheels 543 Posted October 23, 2015 Author Share Posted October 23, 2015 MarkM, Thank-you. Quote Link to post Share on other sites
SloopJohnB 322 Posted October 23, 2015 Share Posted October 23, 2015 As the actress said to the bishop longer the better. Quote Link to post Share on other sites
ScottiE 174 Posted October 25, 2015 Share Posted October 25, 2015 Can't stand it when you guys quote that number's posts - I have him on ignore. Quote Link to post Share on other sites
wheels 543 Posted October 26, 2015 Author Share Posted October 26, 2015 That numbers posts? I figure, by the comment that you "ignore him", you are referring to the fellow that I think needs a tad more time at the centre for rehabilitation, but I don't get the "numbers posts" part.Anyway,I arrived at current pole length as a simple factor of achieving some sail shape and ease of getting the parrot beak clipped into the clue. Too long and it's a real fight. But obviously one wants to get as much sail out to the wind as possible as well.I pull the Main around one side and use a preventer to hold the boom. I angle the main back just slightly to allow the air to spill off the main and into the headsail. So I don't or at least haven't ever gone for stretching the sail out flat and wide as possible. Maybe thinking I am gaining anything by spilling the wind into the Headsail is false thinking. So hence the question, that maybe some far more clever Seasalt arrived at the best ratio and no point in reinventing the wheel. Quote Link to post Share on other sites
Glsssbead 2 Posted November 3, 2015 Share Posted November 3, 2015 The pole on Fineline was longer than J, I guess out about 110%. To pole out the non overlapping headsail coming back from Coastal, we used the leeward stanchion base and a sail tie as the inboard end. It seemed to work. Good thing you only tried this coming back from the race - attaching the pole to the stanchion base is not allowed under the racing rules. Quote Link to post Share on other sites
RushMan 31 Posted November 3, 2015 Share Posted November 3, 2015 Good thing you only tried this coming back from the race - attaching the pole to the stanchion base is not allowed under the racing rules.When racing the big coloured sail was more effective When returning after the race things needed to be simple due to the quantity of hangovers onboard Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.