Dtwo 157 Posted January 11, 2017 Share Posted January 11, 2017 Does anyone know of any facility in the Auckland area that would allow me to put a mast in a boat without hauling? Rig is about 18m, it is a crane job - but where? Quote Link to post Share on other sites
erice 732 Posted January 11, 2017 Share Posted January 11, 2017 halfmoon bay has a mast gantry that works for at least an 11m mast where are your spreaders? http://www.hmbmarina.co.nz/haul-out http://www.hmbmarina.co.nz/i/Files/MastGantryHireForm.pdf check with customer services there Quote Link to post Share on other sites
ex Elly 197 Posted January 13, 2017 Share Posted January 13, 2017 I have seen a mast put in at Pier21 recently, with the boat in the water. Was a pretty big crane though. Quote Link to post Share on other sites
Fish 0 Posted January 13, 2017 Share Posted January 13, 2017 There is a mast gantry at Weiti. Fairly sure it is still there. Would want to check it can handle an 18 m stick though. Gets used regularly for dealing with masts while the boat is in the water. Quote Link to post Share on other sites
waikiore 408 Posted January 13, 2017 Share Posted January 13, 2017 All the big boats and some local ones use rigpro at westhaven all set up for craning in and out in fact they are doing it right now. Quote Link to post Share on other sites
Dtwo 157 Posted January 13, 2017 Author Share Posted January 13, 2017 Thanks all, some good ideas. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.